FC3A-14C204-BMK Bosch EDC17CP05 map pack – Ford F250 6.7 400hp
FC3A-14C204-BMKThis pack holds 76 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Ford F250 6.7 400hp · Bosch EDC17CP05
Also written: FC3A 14C204 BMK · FC3A14C204BMK
More packs: Ford F250 · Bosch EDC17CP05
All 76 maps
The percentage beside a name: the share of the 6 Bosch EDC17CP05 packs that name it too.
Turbo System 26 maps
- Limiter of Turbo pressure8 maps · 100%
- Turbo pressure5 maps · 100%
- Variable geometry (VGT) or wastegate (WG) control13 maps · 100%
Rail 20 maps
- Rail pressure17 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)100%
- Rail pressure limiter f(RPM,Fuel_T)2 maps · 100%
Engine Torque 18 maps
- Limiter of Maximum torque5 maps · 100%
- Maximum torque for fifth gear100%
- Maximum torque for first gear100%
- Maximum torque for forth gear100%
- Maximum torque for reverse gear100%
- Maximum torque for second gear100%
- Maximum torque for seventh gear100%
- Maximum torque for sixth gear100%
- Maximum torque for third gear100%
- Torque during cranking f(RPM,ECT)100%
- Torque request during take off condition4 maps · 100%
Injection System 9 maps
- Fuel quantity injected f(RPM,Trq)5 maps · 100%
- Injection time100%
- Smoke limitation - Lower Lambda value100%
- Smoke limitation - Higher Lambda value2 maps · 50%
Air Control 3 maps
- Gas quantity recirculation3 maps · 50%
How this pack differs from other Bosch EDC17CP05 packs
Named by at least half of them, but not by this pack (14 of 20, the commonest first):
- EGR Valve 50%
- Engine torque correction 50%
- Fuel quantity limiter 50%
- Idle engine speed 50%
- Idle engine speed f(ECT) 50%
- Injection timing - Main Injection Base Map 1 50%
- Injection timing - Main Injection Base Map 2 50%
- Limiter of Maximum torque f(APS) 50%
- Limiter of Turbo pressure f(APS) 50%
- Maximum engine torque correction f(EGT_T) 50%
- Maximum engine torque correction f(eng_T) 50%
- Maximum engine torque correction f(fuel_T) 50%
- Maximum engine torque correction f(oil_T) 50%
- Maximum speed of vehicle 50%
76 maps against the Bosch EDC17CP05 median
The 6 Bosch EDC17CP05 packs name 76 to 173 maps, median 122, and none of them names fewer.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 26 | 30 |
| Rail | 20 | 24 |
| Engine Torque | 18 | 32 |
| Injection System | 9 | 31.5 |
| Air Control | 3 | 1.5 |
| Limiters | 0 | 2.5 |
| Deactivations | 0 | 2 |
Same map list as 2 other SW versions
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW FC3A-14C204-BMC | Ford F250 6.7 400hp | 80 |
| SW FC3A-14C204-LE | Ford F250 6.7 400hp | 80 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.