FC3A-14C204-LE Bosch EDC17CP05 map pack – Ford F250 6.7 400hp

SWFC3A-14C204-LE

Turbo System26Rail24Engine Torque18Injection System9Air Control3

This pack holds 80 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.

Ford F250 6.7 400hp · Bosch EDC17CP05
Also written: FC3A 14C204 LE · FC3A14C204LE

More packs: Ford F250 · Bosch EDC17CP05

All 80 maps

The percentage beside a name: the share of the 6 Bosch EDC17CP05 packs that name it too.

Turbo System 26 maps

Limiter of Turbo pressure8 maps · 100%
Turbo pressure5 maps · 100%
Variable geometry (VGT) or wastegate (WG) control13 maps · 100%

Rail 24 maps

Rail pressure21 maps · 100%
Rail pressure limiter f(RPM,Fuel_Q)100%
Rail pressure limiter f(RPM,Fuel_T)2 maps · 100%

Engine Torque 18 maps

Limiter of Maximum torque5 maps · 100%
Maximum torque for fifth gear100%
Maximum torque for first gear100%
Maximum torque for forth gear100%
Maximum torque for reverse gear100%
Maximum torque for second gear100%
Maximum torque for seventh gear100%
Maximum torque for sixth gear100%
Maximum torque for third gear100%
Torque during cranking f(RPM,ECT)100%
Torque request during take off condition4 maps · 100%

Injection System 9 maps

Fuel quantity injected f(RPM,Trq)5 maps · 100%
Injection time100%
Smoke limitation - Lower Lambda value100%
Smoke limitation - Higher Lambda value2 maps · 50%

Air Control 3 maps

Gas quantity recirculation3 maps · 50%

How this pack differs from other Bosch EDC17CP05 packs

Named by at least half of them, but not by this pack (14 of 20, the commonest first):

EGR Valve 50%
Engine torque correction 50%
Fuel quantity limiter 50%
Idle engine speed 50%
Idle engine speed f(ECT) 50%
Injection timing - Main Injection Base Map 1 50%
Injection timing - Main Injection Base Map 2 50%
Limiter of Maximum torque f(APS) 50%
Limiter of Turbo pressure f(APS) 50%
Maximum engine torque correction f(EGT_T) 50%
Maximum engine torque correction f(eng_T) 50%
Maximum engine torque correction f(fuel_T) 50%
Maximum engine torque correction f(oil_T) 50%
Maximum speed of vehicle 50%

80 maps against the Bosch EDC17CP05 median

The 6 Bosch EDC17CP05 packs name 76 to 173 maps, median 122; 17% of them name fewer than this one.

Category	This pack	Median pack
Turbo System	26	30
Rail	24	24
Engine Torque	18	32
Injection System	9	31.5
Air Control	3	1.5
Limiters	0	2.5
Deactivations	0	2

Same map list as 2 other SW versions

These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.

Number	Listed for	Maps
SW FC3A-14C204-BMC	Ford F250 6.7 400hp	80
Calibration FC3A-14C204-BMK	Ford F250 6.7 400hp	76

Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.