Bosch ME7.1.1 map pack – Audi A6 3.0 V6 220hp
Engine Torque17Spark Advance11Air Control6Injection System4Limiters3
This pack holds 41 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A6 3.0 V6 220hp · Bosch ME7.1.1
More packs: Audi A6 · Bosch ME7.1.1
All 41 maps
The percentage beside a name: the share of the 106 Bosch ME7.1.1 packs that name it too.
Engine Torque 17 maps
- Optimal engine torque99%
- Torque request during standard condition5 maps · 80%
- Torque monitoring11 maps · 20%
Spark Advance 11 maps
- Spark Advance base map4 maps · 96%
- Optimal Spark Advance4 maps · 49%
- Spark advance during cranking3 maps · 25%
Air Control 6 maps
- Requested engine load99%
- Airflow mass through throttle valve97%
- Throttle valve - operating angle86%
- Exhaust gas temperature3 maps · 58%
Injection System 4 maps
- Lambda for component protection91%
- Requested Lambda89%
- Injection correction2 maps · 58%
Limiters 3 maps
- RPM Limiter3 maps · 94%
How this pack differs from other Bosch ME7.1.1 packs
Named here, but by under half of the 106 Bosch ME7.1.1 packs:
- Torque monitoring 20%
- Spark advance during cranking 25%
- Optimal Spark Advance 49%
Named by at least half of them, but not by this pack:
- Torque request - Low speed 67%
- RPM limiter (higher threshold) 66%
- Maximum speed of vehicle 65%
- Torque request during take off condition 63%
- Torque request - Reverse Gear 58%
- Injection base map 53%
41 maps against the Bosch ME7.1.1 median
The 106 Bosch ME7.1.1 packs name 13 to 149 maps, median 42.5; 30% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 17 | 6 |
| Spark Advance | 11 | 9 |
| Air Control | 6 | 6 |
| Injection System | 4 | 6 |
| Limiters | 3 | 9 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.