0261207766 1037366367 Bosch ME7.1.1 map pack – Audi A6 2.7 250hp
0261207766SW1037366367CAL4Z7907551N_0003This pack holds 71 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A6 2.7 250hp · Bosch ME7.1.1
Also written: 0 261 207 766 · 1 037 366 367
More packs: Audi A6 · Bosch ME7.1.1
All 71 maps
The percentage beside a name: the share of the 106 Bosch ME7.1.1 packs that name it too.
Engine Torque 17 maps
- Optimal engine torque99%
- Torque request during standard condition80%
- Torque request - Low speed2 maps · 67%
- Torque request during take off condition63%
- Calculated engine torque4 maps · 28%
- Torque monitoring7 maps · 20%
- Torque request - High speed11%
Limiters 14 maps
- RPM Limiter4 maps · 94%
- RPM limiter (higher threshold)66%
- Maximum speed of vehicle8 maps · 65%
- RPM limiter (lower threshold)17%
Turbo System 13 maps
- Wastegate Duty Cycle2 maps · 21%
- Turbo pressure3 maps · 14%
- Limiter of steady turbo pressure13%
- Correction of slow incremental factor of turbo pressure12%
- Fast reduction factor of turbo pressure12%
- Limiter of impulsive turbo pressure12%
- Slow incremental factor of turbo pressure12%
- Limiter of Turbo pressure11%
- Correction of steady turbo pressure f(IAT)2 maps · 3%
Air Control 12 maps
- Requested engine load99%
- Airflow mass through throttle valve97%
- Throttle valve - operating angle86%
- Exhaust gas temperature4 maps · 58%
- Threshold of end limitation on throttle valve angle44%
- Throttle valve f(Accelerator pedal)43%
- Reference of maximum throttle valve angle37%
- MAF sensor slope9%
- MAF scaling7%
Injection System 6 maps
- Lambda for component protection2 maps · 91%
- Requested Lambda89%
- Injection base map53%
- Conversion of relative fuel mass into effective injection time8%
- Overrun injection cut off engine speed lower threshold AC ON1%
Spark Advance 5 maps
- Spark Advance base map2 maps · 96%
- Optimal Spark Advance49%
- Optimal Spark Advance 140%
- Spark advance during cranking25%
Deactivations 4 maps
- Lambda Sensor (1=ON, 0=OFF)2 maps · 45%
- Catalytic converter Diagnosis (1=ON, 0=OFF)31%
- Overrun fuel cut deactivation1%
How this pack differs from other Bosch ME7.1.1 packs
Named here, but by under half of the 106 Bosch ME7.1.1 packs (14 of 26, the rarest first):
- Overrun fuel cut deactivation 1%
- Overrun injection cut off engine speed lower threshold AC ON 1%
- Correction of steady turbo pressure f(IAT) 3%
- MAF scaling 7%
- Conversion of relative fuel mass into effective injection time 8%
- MAF sensor slope 9%
- Limiter of Turbo pressure 11%
- Torque request - High speed 11%
- Correction of slow incremental factor of turbo pressure 12%
- Fast reduction factor of turbo pressure 12%
- Limiter of impulsive turbo pressure 12%
- Slow incremental factor of turbo pressure 12%
- Limiter of steady turbo pressure 13%
- Turbo pressure 14%
Named by at least half of them, but not by this pack:
- Injection correction 58%
- Torque request - Reverse Gear 58%
71 maps against the Bosch ME7.1.1 median
The 106 Bosch ME7.1.1 packs name 13 to 149 maps, median 42.5; 92% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 17 | 6 |
| Limiters | 14 | 9 |
| Turbo System | 13 | 0 |
| Air Control | 12 | 6 |
| Injection System | 6 | 6 |
| Spark Advance | 5 | 9 |
| Deactivations | 4 | 0 |
Other SW versions on HW 0261207766
2 SW versions sit on this HW in the archive, 2 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037363035 | Audi A6 2.7 250hp BES | 49 maps |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.