Bosch ME7.8 WinOLS map packs

12 software versions of the Bosch ME7.8 with a map pack (mappack), the original included. Open one to see every map.

What a Bosch ME7.8 map pack holds

One CSV for WinOLS with the maps of that exact software version: their names, categories, X/Y axes and factors, next to the original .bin in the same ZIP. It is not a DAMOS or A2L, and it holds no tuned values.

How to import a CSV map pack into WinOLS · All Bosch ME7.8 original files

Maps most packs have

Throttle valve - operating angle100%RPM Limiter100%Requested Lambda100%Spark Advance base map100%Threshold of end limitation on throttle valve angle100%Airflow mass through throttle valve100%Optimal engine torque100%Torque request during take off condition100%Optimal Spark Advance100%Requested engine load100%Lambda for component protection92%Factor Injection correction f(ECT)92%Calculated engine torque75%Lambda Sensor (1=ON, 0=OFF)67%Limiter of Turbo pressure58%RPM limiter (higher threshold)50%Turbo pressure50%Catalytic converter Diagnosis (1=ON, 0=OFF)50%Maximum speed of vehicle50%Torque request during take off condition - Reverse Gear50%Injection base map42%Torque monitoring33%RPM limiter (lower threshold)33%Correction of turbo pressure f(IAT)25%Injection at partial load25%Wastegate Duty Cycle25%Exhaust gas temperature25%Injection correction f(ECT)25%Minimum Spark Advance25%Idle engine speed f(ECT)25%MAF sensor slope25%Injector offset dependent on voltage25%Conversion of relative fuel mass into effective injection time25%Limiter of knocking sensor25%MAF25%MAF scaling25%Overboost duration17%Linearization of impulsive turbo pressure17%Engine load limiter17%RPM limiter in Neutral17%

Bosch ME7.8 WinOLS map packs

What a Bosch ME7.8 map pack holds

Maps most packs have

Bosch ME7.8 files with a map pack