Bosch ME7.8 map pack – Porsche 911 3.6 420hp
Air Control22Deactivations19Spark Advance18Turbo System18Limiters16Engine Torque9Injection System6
This pack holds 108 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Porsche 911 3.6 420hp · Bosch ME7.8
More packs: Porsche 911 · Bosch ME7.8
All 108 maps
The percentage beside a name: the share of the 12 Bosch ME7.8 packs that name it too.
Air Control 22 maps
- Airflow mass through throttle valve100%
- Requested engine load100%
- Threshold of end limitation on throttle valve angle100%
- Throttle valve - operating angle100%
- Exhaust gas temperature2 maps · 25%
- MAF4 maps · 25%
- MAF scaling25%
- MAF sensor slope3 maps · 25%
- Engine load limiter2 maps · 17%
- MAF sensor offset17%
- MAP sensor maximum voltage8%
- MAP sensor minimum voltage8%
- MAP sensor offset8%
- MAP sensor slope8%
- Maximum MAF sensor8%
Deactivations 19 maps
- Lambda Sensor (1=ON, 0=OFF)18 maps · 67%
- Catalytic converter Diagnosis (1=ON, 0=OFF)50%
Spark Advance 18 maps
- Optimal Spark Advance4 maps · 100%
- Spark Advance base map4 maps · 100%
- Limiter of knocking sensor8 maps · 25%
- Minimum Spark Advance2 maps · 25%
Turbo System 18 maps
- Limiter of Turbo pressure4 maps · 58%
- Turbo pressure3 maps · 50%
- Correction of turbo pressure f(IAT)2 maps · 25%
- Wastegate Duty Cycle2 maps · 25%
- Linearization of impulsive turbo pressure17%
- Overboost duration17%
- Ambient pressure threshold for charge pressure diagnostics2 maps · 8%
- Correction of turbo pressure2 maps · 8%
- Delta pressure limit under overcharge error8%
Limiters 16 maps
- RPM Limiter7 maps · 100%
- Maximum speed of vehicle4 maps · 50%
- Idle engine speed f(ECT)4 maps · 25%
- RPM limiter in Neutral17%
Engine Torque 9 maps
- Optimal engine torque100%
- Torque request during take off condition100%
- Torque request during take off condition - Reverse Gear50%
- Torque monitoring6 maps · 33%
Injection System 6 maps
- Requested Lambda100%
- Lambda for component protection2 maps · 92%
- Conversion of relative fuel mass into effective injection time25%
- Injection at partial load25%
- Injector offset dependent on voltage25%
How this pack differs from other Bosch ME7.8 packs
Named here, but by under half of the 12 Bosch ME7.8 packs (14 of 26, the rarest first):
- Ambient pressure threshold for charge pressure diagnostics 8%
- Correction of turbo pressure 8%
- Delta pressure limit under overcharge error 8%
- MAP sensor maximum voltage 8%
- MAP sensor minimum voltage 8%
- MAP sensor offset 8%
- MAP sensor slope 8%
- Maximum MAF sensor 8%
- Engine load limiter 17%
- Linearization of impulsive turbo pressure 17%
- MAF sensor offset 17%
- Overboost duration 17%
- RPM limiter in Neutral 17%
- Conversion of relative fuel mass into effective injection time 25%
Named by at least half of them, but not by this pack:
- Factor Injection correction f(ECT) 92%
- Calculated engine torque 75%
- RPM limiter (higher threshold) 50%
108 maps against the Bosch ME7.8 median
The 12 Bosch ME7.8 packs name 23 to 108 maps, median 40.5; 92% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Air Control | 22 | 4 |
| Deactivations | 19 | 5.5 |
| Spark Advance | 18 | 8 |
| Turbo System | 18 | 4 |
| Limiters | 16 | 8 |
| Engine Torque | 9 | 5 |
| Injection System | 6 | 7 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.