CASC8L50.DAT 10329872AA Siemens SIMOS 18 map pack – Audi A6 1.8 192hp
HW
CASC8L50.DATSW10329872AACAL4G0906264_0004Engine Torque120Spark Advance117Air Control47Turbo System28Limiters18Injection System10Rail9Deactivations5
This pack holds 354 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A6 1.8 192hp · Siemens SIMOS 18
More packs: Audi A6 · Siemens SIMOS 18
All 354 maps
The percentage beside a name: the share of the 16 Siemens SIMOS 18 packs that name it too.
Engine Torque 120 maps
- Calculated engine torque100%
- Limiter of Maximum torque67 maps · 100%
- Optimal engine torque24 maps · 100%
- Torque limiter for clutch protection4 maps · 100%
- Torque request during take off condition2 maps · 81%
- Torque request during standard condition21 maps · 69%
- Engine torque correction50%
Spark Advance 117 maps
- Optimal Spark Advance37 maps · 100%
- Spark Advance base map38 maps · 100%
- Minimum Spark Advance32 maps · 88%
- Limiter of knocking sensor8 maps · 62%
- Spark advance correction f(Air_T)50%
- Spark Advance correction in function of high ECT and IAT38%
Air Control 47 maps
- Exhaust gas temperature4 maps · 100%
- Reference of maximum throttle valve angle100%
- Requested engine load24 maps · 100%
- Throttle valve3 maps · 100%
- Engine load limiter4 maps · 94%
- Manual Setpoint MAP62%
- MAP sensor maximum voltage62%
- Maximum MAF sensor62%
- Minimum MAF sensor62%
- Threshold of end limitation on throttle valve angle62%
- Airflow mass through throttle valve50%
- Cylinder head temperature4 maps · 50%
- Maximum allowable exhaust gas temperature for spark retard control50%
Turbo System 28 maps
- Limiter of Turbo pressure13 maps · 100%
- Linearization of impulsive turbo pressure2 maps · 100%
- Wastegate Duty Cycle4 maps · 100%
- Correction of impulsive turbo pressure f(IAT)81%
- Limiter of impulsive turbo pressure2 maps · 81%
- Minimum pressure difference for basic charge air pressure too low62%
- Threshold for turbocharger speed reduction62%
- Turbo pressure2 maps · 56%
- Boost pressure deviation for basic charge air pressure too low50%
- Maximum turbocharger temperature50%
Limiters 18 maps
- Maximum speed of vehicle7 maps · 100%
- RPM Limiter6 maps · 100%
- RPM limiter (higher threshold)2 maps · 56%
- RPM limiter in Neutral3 maps · 44%
Injection System 10 maps
- Injection at full load2 maps · 100%
- Injection base map2 maps · 100%
- Requested Lambda3 maps · 100%
- Lambda for component protection75%
- Limiter of Lambda B56%
- Limiter of Lambda A50%
Rail 9 maps
- Rail pressure9 maps · 100%
Deactivations 5 maps
- Deactivation turbocharger protection (1=ON, 0=OFF)2 maps · 62%
- Lambda Sensor (1=ON, 0=OFF)2 maps · 62%
- Catalytic converter Diagnosis (1=ON, 0=OFF)6%
How this pack differs from other Siemens SIMOS 18 packs
Named here, but by under half of the 16 Siemens SIMOS 18 packs:
- Catalytic converter Diagnosis (1=ON, 0=OFF) 6%
- Spark Advance correction in function of high ECT and IAT 38%
- RPM limiter in Neutral 44%
Named by at least half of them, but not by this pack:
- Torque request during take off condition - Automatic Transmission 69%
- Maximum MAP sensor 56%
354 maps against the Siemens SIMOS 18 median
The 16 Siemens SIMOS 18 packs name 254 to 394 maps, median 340.5; 56% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 120 | 116 |
| Spark Advance | 117 | 113.5 |
| Air Control | 47 | 42 |
| Turbo System | 28 | 25.5 |
| Limiters | 18 | 15 |
| Injection System | 10 | 10 |
| Rail | 9 | 12 |
| Deactivations | 5 | 4 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.