8P0907115L 8P0907115L_0010 Bosch MED9.1 map pack – Audi A3 2.0 200hp
HW
8P0907115LSW0010CAL8P0907115L_0010Turbo System25Engine Torque15Spark Advance12Injection System12Air Control9Other8Limiters7Rail6
This pack holds 94 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A3 2.0 200hp · Bosch MED9.1
Also written: 8P0 907 115 L · 8P0-907-115-L
More packs: Audi A3 · Bosch MED9.1
All 94 maps
The percentage beside a name: the share of the 152 Bosch MED9.1 packs that name it too.
Turbo System 25 maps
- Limiter of Turbo pressure2 maps · 79%
- Turbo pressure2 maps · 79%
- Limiter of impulsive turbo pressure3 maps · 75%
- Correction of turbo pressure f(IAT)3 maps · 72%
- Slow incremental factor of turbo pressure72%
- Correction of slow incremental factor of turbo pressure71%
- Fast reduction factor of turbo pressure71%
- Limiter of steady turbo pressure3 maps · 68%
- Correction of impulsive turbo pressure f(IAT)3 maps · 65%
- Linearization of impulsive turbo pressure56%
- Limiter of Turbo pressure f(APS)53%
- Correction of steady turbo pressure f(IAT)3 maps · 47%
- Limiter of Turbo pressure f(IAT)43%
Engine Torque 15 maps
- Optimal engine torque100%
- Desired torque at wheel75%
- Calculated engine torque6 maps · 69%
- Limiter of Maximum torque56%
- Torque request during take off condition - Fifth Gear53%
- Torque request during take off condition - First Gear53%
- Torque request during take off condition - Forth Gear53%
- Torque request during take off condition - Second Gear53%
- Torque request during take off condition - Third Gear53%
- Torque request during take off condition - Sixth Gear4%
Spark Advance 12 maps
- Spark Advance base map6 maps · 99%
- Spark advance during cranking86%
- Optimal Spark Advance4 maps · 50%
- Spark Advance correction f(ECT)49%
Injection System 12 maps
- Requested Lambda3 maps · 99%
- Injection base map74%
- Injection correction65%
- Injection enrichment61%
- Limiter of Lambda A3 maps · 47%
- Limiter of Lambda B3 maps · 41%
Air Control 9 maps
- Requested engine load99%
- Airflow mass through throttle valve95%
- Threshold of end limitation on throttle valve angle95%
- Throttle valve - operating angle95%
- Throttle valve f(Accelerator pedal)85%
- Exhaust gas temperature2 maps · 64%
- Engine load limiter2 maps · 56%
Other 8 maps
- Lambda Sensor (1=ON6 maps · 6%
- Catalytic converter Diagnosis (1=ON2 maps · 5%
Limiters 7 maps
- RPM Limiter3 maps · 99%
- RPM limiter (higher threshold)2 maps · 97%
- Maximum speed of vehicle2 maps · 91%
Rail 6 maps
- Rail pressure5 maps · 67%
- Rail pressure limiter f(RPM,Fuel_T)38%
How this pack differs from other Bosch MED9.1 packs
Named here, but by under half of the 152 Bosch MED9.1 packs:
- Torque request during take off condition - Sixth Gear 4%
- Catalytic converter Diagnosis (1=ON 5%
- Lambda Sensor (1=ON 6%
- Rail pressure limiter f(RPM,Fuel_T) 38%
- Limiter of Lambda B 41%
- Limiter of Turbo pressure f(IAT) 43%
- Limiter of Lambda A 47%
- Correction of steady turbo pressure f(IAT) 47%
- Spark Advance correction f(ECT) 49%
Named by at least half of them, but not by this pack:
- Lambda Sensor (1=ON, 0=OFF) 66%
- Catalytic converter Diagnosis (1=ON, 0=OFF) 62%
- Lambda for component protection 53%
- Torque request during take off condition - Reverse Gear 51%
- Rail pressure limiter f(RPM,Fuel_Q) 51%
94 maps against the Bosch MED9.1 median
The 152 Bosch MED9.1 packs name 27 to 213 maps, median 94.5; 46% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 25 | 20 |
| Engine Torque | 15 | 15 |
| Spark Advance | 12 | 22 |
| Injection System | 12 | 11 |
| Air Control | 9 | 9 |
| Other | 8 | 0 |
| Limiters | 7 | 17 |
| Rail | 6 | 6 |
| Deactivations | 0 | 2 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.