1037561526 4G0907401R_0004 Bosch EDC17CP44 map pack – Audi A6 3.0 TDI 245hp
1037561526CAL4G0907401R_0004This pack holds 86 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A6 3.0 TDI 245hp · Bosch EDC17CP44
Also written: 1 037 561 526
More packs: Audi A6 · Bosch EDC17CP44
All 86 maps
The percentage beside a name: the share of the 206 Bosch EDC17CP44 packs that name it too.
Rail 24 maps
- Rail pressure10 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)100%
- Rail pressure limiter f(RPM,Fuel_T)13 maps · 51%
Injection System 21 maps
- Fuel quantity injected f(RPM,Trq)6 maps · 100%
- Injection timing - Main Injection Base Map 13 maps · 100%
- Injection time97%
- Injection timing - Main Injection Base Map 23 maps · 97%
- Injection timing - Main Injection Base Map 33 maps · 68%
- Injection timing - Main Injection Base Map 43 maps · 50%
- Injection timing - Main Injection Base Map 52 maps · 25%
Turbo System 20 maps
- Turbo pressure10 maps · 100%
- Limiter of Turbo pressure f(APS)2 maps · 99%
- Variable geometry (VGT) or wastegate (WG) control8 maps · 33%
Engine Torque 19 maps
- Limiter of Maximum torque f(APS)2 maps · 100%
- Maximum torque for fifth gear100%
- Maximum torque for first gear100%
- Maximum torque for forth gear100%
- Maximum torque for second gear100%
- Maximum torque for sixth gear100%
- Maximum torque for third gear99%
- Torque request during standard condition4 maps · 99%
- Torque during cranking f(RPM,ECT)2 maps · 96%
- Limiter of Maximum torque95%
- Maximum torque for seventh gear95%
- Maximum torque for reverse gear94%
- Torque limiter at gearbox input26%
- Torque limiter for clutch protection12%
Limiters 2 maps
- Idle engine speed f(ECT)2 maps · 23%
How this pack differs from other Bosch EDC17CP44 packs
Named here, but by under half of the 206 Bosch EDC17CP44 packs:
- Torque limiter for clutch protection 12%
- Idle engine speed f(ECT) 23%
- Injection timing - Main Injection Base Map 5 25%
- Torque limiter at gearbox input 26%
- Variable geometry (VGT) or wastegate (WG) control 33%
- Injection timing - Main Injection Base Map 4 50%
Named by at least half of them, but not by this pack:
- Injection correction 91%
- Torque request during take off condition 68%
- Maximum speed of vehicle 63%
- Variable Geometry Duty Cycle 61%
- Smoke limitation - Lower Lambda value 60%
- Exhaust gas temperature 55%
- Injection correction f(ECT) 50%
86 maps against the Bosch EDC17CP44 median
The 206 Bosch EDC17CP44 packs name 51 to 392 maps, median 139; 11% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Rail | 24 | 12 |
| Injection System | 21 | 53 |
| Turbo System | 20 | 15 |
| Engine Torque | 19 | 29 |
| Limiters | 2 | 3 |
| Air Control | 0 | 6.5 |
| Deactivations | 0 | 2 |
Same map list as 2 other SW versions
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| Calibration 4H0907401_0006 | Audi A8 3.0 TDI 250hp | 79 |
| Calibration 4H0907401_0009 | Audi A8 3.0 TDI 245hp | 79 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.