8V0906259_0002 Siemens SIMOS12.1 map pack – Audi A3 2.0 280hp
CAL
8V0906259_0002Spark Advance112Engine Torque93Air Control48Limiters22Turbo System21Rail8Injection System7Deactivations1
This pack holds 312 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A3 2.0 280hp · Siemens SIMOS12.1
More packs: Audi A3 · Siemens SIMOS12.1
All 312 maps
The percentage beside a name: the share of the 14 Siemens SIMOS12.1 packs that name it too.
Spark Advance 112 maps
- Optimal Spark Advance56 maps · 100%
- Spark Advance base map19 maps · 100%
- Minimum Spark Advance32 maps · 50%
- Limiter of knocking sensor4 maps · 43%
- Spark advance correction f(Air_T)29%
Engine Torque 93 maps
- Limiter of Maximum torque36 maps · 100%
- Optimal engine torque37 maps · 100%
- Torque request during standard condition9 maps · 100%
- Calculated engine torque86%
- Torque request during take off condition - Automatic Transmission5 maps · 86%
- Torque limiter for clutch protection2 maps · 71%
- Torque request during take off condition3 maps · 64%
Air Control 48 maps
- Reference of maximum throttle valve angle100%
- Requested engine load36 maps · 100%
- Throttle valve100%
- Engine load limiter2 maps · 93%
- Exhaust gas temperature3 maps · 93%
- Cylinder head temperature4 maps · 50%
- Maximum allowable exhaust gas temperature for spark retard control50%
Limiters 22 maps
- Maximum speed of vehicle8 maps · 100%
- RPM Limiter5 maps · 100%
- RPM limiter (higher threshold)6 maps · 64%
- RPM limiter in Neutral3 maps · 64%
Turbo System 21 maps
- Turbo pressure2 maps · 100%
- Wastegate Duty Cycle4 maps · 100%
- Limiter of Turbo pressure9 maps · 93%
- Limiter of impulsive turbo pressure57%
- Maximum turbocharger temperature50%
- Threshold for turbocharger speed reduction50%
- Linearization of impulsive turbo pressure2 maps · 43%
- Correction of impulsive turbo pressure f(IAT)36%
Rail 8 maps
- Rail pressure8 maps · 93%
Injection System 7 maps
- Injection at full load100%
- Injection base map2 maps · 100%
- Requested Lambda4 maps · 100%
Deactivations 1 map
- Catalytic converter Diagnosis (1=ON, 0=OFF)79%
How this pack differs from other Siemens SIMOS12.1 packs
Named here, but by under half of the 14 Siemens SIMOS12.1 packs:
- Spark advance correction f(Air_T) 29%
- Correction of impulsive turbo pressure f(IAT) 36%
- Limiter of knocking sensor 43%
- Linearization of impulsive turbo pressure 43%
Named by at least half of them, but not by this pack:
- Lambda for component protection 93%
312 maps against the Siemens SIMOS12.1 median
The 14 Siemens SIMOS12.1 packs name 80 to 312 maps, median 209; 93% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Spark Advance | 112 | 75 |
| Engine Torque | 93 | 66 |
| Air Control | 48 | 21 |
| Limiters | 22 | 20.5 |
| Turbo System | 21 | 17 |
| Rail | 8 | 8 |
| Injection System | 7 | 7 |
| Deactivations | 1 | 1 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.