0261206442 1037352377 Bosch ME7.5 map pack – Audi S3 1.8 210hp
0261206442SW1037352377This pack holds 68 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S3 1.8 210hp · Bosch ME7.5
Also written: 0 261 206 442 · 1 037 352 377
More packs: Audi S3 · Bosch ME7.5
All 68 maps
The percentage beside a name: the share of the 137 Bosch ME7.5 packs that name it too.
Turbo System 14 maps
- Slow incremental factor of turbo pressure84%
- Fast reduction factor of turbo pressure81%
- Limiter of Turbo pressure4 maps · 80%
- Correction of slow incremental factor of turbo pressure2 maps · 72%
- Wastegate Duty Cycle62%
- Linearization of impulsive turbo pressure59%
- Limiter of steady turbo pressure53%
- Limiter of impulsive turbo pressure50%
- Correction of turbo pressure18%
- Overboost duration9%
Engine Torque 13 maps
- Optimal engine torque98%
- Torque request during take off condition84%
- Torque monitoring10 maps · 31%
- Torque request - Reverse Gear31%
Air Control 12 maps
- Requested engine load97%
- Throttle valve - operating angle97%
- Airflow mass through throttle valve93%
- Reference of maximum throttle valve angle86%
- Threshold of end limitation on throttle valve angle77%
- Throttle valve f(Accelerator pedal)72%
- Exhaust gas temperature60%
- MAF scaling38%
- MAF sensor offset32%
- MAF23%
- MAF sensor slope18%
- Throttle valve11%
Spark Advance 11 maps
- Spark Advance base map2 maps · 98%
- Optimal Spark Advance2 maps · 66%
- Minimum Spark Advance2 maps · 38%
- Limiter of knocking sensor4 maps · 35%
- Spark advance correction f(Air_T)24%
Limiters 9 maps
- RPM Limiter3 maps · 96%
- RPM limiter (higher threshold)74%
- Maximum speed of vehicle68%
- Idle engine speed f(ECT)4 maps · 22%
Injection System 6 maps
- Requested Lambda96%
- Phase of injection2 maps · 74%
- Lambda for component protection73%
- Injection at partial load66%
- Injection correction61%
Deactivations 3 maps
- Lambda Sensor (1=ON, 0=OFF)2 maps · 80%
- Speed limiters (switch)12%
How this pack differs from other Bosch ME7.5 packs
Named here, but by under half of the 137 Bosch ME7.5 packs:
- Overboost duration 9%
- Throttle valve 11%
- Speed limiters (switch) 12%
- MAF sensor slope 18%
- Correction of turbo pressure 18%
- Idle engine speed f(ECT) 22%
- MAF 23%
- Spark advance correction f(Air_T) 24%
- Torque monitoring 31%
- Torque request - Reverse Gear 31%
- MAF sensor offset 32%
- Limiter of knocking sensor 35%
- MAF scaling 38%
- Minimum Spark Advance 38%
Named by at least half of them, but not by this pack:
- Spark advance during cranking 62%
68 maps against the Bosch ME7.5 median
The 137 Bosch ME7.5 packs name 12 to 108 maps, median 49; 77% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 14 | 11 |
| Engine Torque | 13 | 4 |
| Air Control | 12 | 8 |
| Spark Advance | 11 | 5 |
| Limiters | 9 | 8 |
| Injection System | 6 | 6 |
| Deactivations | 3 | 4 |
Other SW versions on HW 0261206442
3 SW versions sit on this HW in the archive, 5 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037352049 | Audi S3 1.8 20V TURBO 210hp | 36 maps |
| 1037352465 | Audi S3 1.8 20V TURBO 210hp | 32 maps |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.