0261206442 1037352465 Bosch ME7.5 map pack – Audi S3 1.8 20V TURBO 210hp
0261206442SW1037352465CAL8L0906018K_0004This pack holds 32 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S3 1.8 20V TURBO 210hp · Bosch ME7.5
Also written: 0 261 206 442 · 1 037 352 465
More packs: Audi S3 · Bosch ME7.5
All 32 maps
The percentage beside a name: the share of the 137 Bosch ME7.5 packs that name it too.
Turbo System 9 maps
- Slow incremental factor of turbo pressure84%
- Fast reduction factor of turbo pressure81%
- Limiter of Turbo pressure2 maps · 80%
- Correction of slow incremental factor of turbo pressure2 maps · 72%
- Limiter of steady turbo pressure53%
- Limiter of impulsive turbo pressure50%
- Limiter of Turbo pressure f(APS)4%
Air Control 6 maps
- Requested engine load97%
- Throttle valve - operating angle97%
- Airflow mass through throttle valve93%
- Reference of maximum throttle valve angle86%
- Threshold of end limitation on throttle valve angle77%
- Throttle valve11%
Injection System 6 maps
- Requested Lambda96%
- Phase of injection2 maps · 74%
- Lambda for component protection73%
- Injection base map37%
- Injection correction f(ECT)18%
Limiters 4 maps
- RPM Limiter2 maps · 96%
- RPM limiter (higher threshold)74%
- Maximum speed of vehicle68%
Spark Advance 4 maps
- Spark Advance base map2 maps · 98%
- Optimal Spark Advance 12 maps · 6%
Engine Torque 3 maps
- Optimal engine torque98%
- Torque request during take off condition84%
- Torque request during take off condition - Reverse Gear26%
How this pack differs from other Bosch ME7.5 packs
Named here, but by under half of the 137 Bosch ME7.5 packs:
- Limiter of Turbo pressure f(APS) 4%
- Optimal Spark Advance 1 6%
- Throttle valve 11%
- Injection correction f(ECT) 18%
- Torque request during take off condition - Reverse Gear 26%
- Injection base map 37%
Named by at least half of them, but not by this pack:
- Lambda Sensor (1=ON, 0=OFF) 80%
- Throttle valve f(Accelerator pedal) 72%
- Injection at partial load 66%
- Optimal Spark Advance 66%
- Spark advance during cranking 62%
- Wastegate Duty Cycle 62%
- Injection correction 61%
- Exhaust gas temperature 60%
- Linearization of impulsive turbo pressure 59%
32 maps against the Bosch ME7.5 median
The 137 Bosch ME7.5 packs name 12 to 108 maps, median 49; 9% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 9 | 11 |
| Air Control | 6 | 8 |
| Injection System | 6 | 6 |
| Limiters | 4 | 8 |
| Spark Advance | 4 | 5 |
| Engine Torque | 3 | 4 |
| Deactivations | 0 | 4 |
Other SW versions on HW 0261206442
3 SW versions sit on this HW in the archive, 5 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037352049 | Audi S3 1.8 20V TURBO 210hp | 36 maps |
| 1037352377 | Audi S3 1.8 210hp | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.