CASC8L50.DAT 4G5907115C_0001 Siemens SIMOS 18.1 map pack – Audi A6 2.0 252hp
CASC8L50.DATCAL4G5907115C_0001This pack holds 259 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A6 2.0 252hp · Siemens SIMOS 18.1
More packs: Audi A6 · Siemens SIMOS 18.1
All 259 maps
The percentage beside a name: the share of the 48 Siemens SIMOS 18.1 packs that name it too.
Engine Torque 115 maps
- Calculated engine torque100%
- Limiter of Maximum torque65 maps · 100%
- Optimal engine torque24 maps · 100%
- Torque limiter for clutch protection2 maps · 100%
- Torque request during standard condition21 maps · 96%
- Torque request during take off condition2 maps · 62%
Spark Advance 72 maps
- Optimal Spark Advance36 maps · 100%
- Spark Advance base map36 maps · 100%
Air Control 30 maps
- Reference of maximum throttle valve angle100%
- Requested engine load24 maps · 100%
- Throttle valve3 maps · 98%
- Engine load limiter2 maps · 92%
Turbo System 18 maps
- Limiter of Turbo pressure8 maps · 100%
- Linearization of impulsive turbo pressure2 maps · 100%
- Wastegate Duty Cycle4 maps · 100%
- Limiter of impulsive turbo pressure2 maps · 96%
- Turbo pressure2 maps · 58%
Rail 9 maps
- Rail pressure9 maps · 100%
Limiters 7 maps
- Maximum speed of vehicle2 maps · 100%
- RPM Limiter5 maps · 100%
Injection System 7 maps
- Injection at full load2 maps · 100%
- Injection base map2 maps · 100%
- Requested Lambda2 maps · 100%
- Lambda for component protection50%
Deactivations 1 map
- Catalytic converter Diagnosis (1=ON, 0=OFF)17%
How this pack differs from other Siemens SIMOS 18.1 packs
Named here, but by under half of the 48 Siemens SIMOS 18.1 packs:
- Catalytic converter Diagnosis (1=ON, 0=OFF) 17%
Named by at least half of them, but not by this pack (14 of 32, the commonest first):
- Exhaust gas temperature 96%
- RPM limiter (higher threshold) 92%
- Correction of impulsive turbo pressure f(IAT) 90%
- Minimum Spark Advance 85%
- Limiter of knocking sensor 81%
- Threshold of end limitation on throttle valve angle 81%
- Limiter of Lambda B 79%
- Airflow mass through throttle valve 77%
- RPM limiter (lower threshold) 77%
- Deactivation turbocharger protection (1=ON, 0=OFF) 75%
- Engine torque correction 75%
- Limiter of Lambda A 75%
- MAP sensor maximum voltage 75%
- Manual Setpoint MAP 75%
259 maps against the Siemens SIMOS 18.1 median
The 48 Siemens SIMOS 18.1 packs name 256 to 467 maps, median 366; 2% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 115 | 119.5 |
| Spark Advance | 72 | 116 |
| Air Control | 30 | 47 |
| Turbo System | 18 | 26 |
| Rail | 9 | 13 |
| Limiters | 7 | 26.5 |
| Injection System | 7 | 10 |
| Deactivations | 1 | 4 |
Same map list as 1 other SW version
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| Calibration 3ED907115_0003 | Audi A6 2.0 252hp | 259 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.