0261207857 1037366304 Bosch ME7.1.1 map pack – Audi RS6 4.2 V8 BITURBO 450hp
0261207857SW1037366304CAL4D1907558_0002This pack holds 49 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi RS6 4.2 V8 BITURBO 450hp · Bosch ME7.1.1
Also written: 0 261 207 857 · 1 037 366 304
More packs: Audi RS6 · Bosch ME7.1.1
All 49 maps
The percentage beside a name: the share of the 106 Bosch ME7.1.1 packs that name it too.
Engine Torque 13 maps
- Optimal engine torque2 maps · 99%
- Torque request during standard condition80%
- Torque request - Low speed67%
- Torque monitoring8 maps · 20%
- Torque request during take off condition - Reverse Gear13%
Spark Advance 9 maps
- Spark Advance base map6 maps · 96%
- Optimal Spark Advance 243%
- Optimal Spark Advance 140%
- Spark advance during cranking25%
Turbo System 9 maps
- Limiter of steady turbo pressure13%
- Correction of slow incremental factor of turbo pressure12%
- Fast reduction factor of turbo pressure12%
- Limiter of impulsive turbo pressure12%
- Slow incremental factor of turbo pressure12%
- Limiter of Turbo pressure11%
- Linearization of impulsive turbo pressure10%
- Variable geometry (VGT) or wastegate (WG) control2 maps · 2%
Injection System 6 maps
- Lambda for component protection91%
- Requested Lambda89%
- Injection base map2 maps · 53%
- Phase of injection2 maps · 18%
Air Control 6 maps
- Requested engine load99%
- Airflow mass through throttle valve97%
- Throttle valve - operating angle86%
- Threshold of end limitation on throttle valve angle44%
- Throttle valve f(Accelerator pedal)43%
- Reference of maximum throttle valve angle37%
Limiters 3 maps
- RPM Limiter94%
- RPM limiter (higher threshold)66%
- Maximum speed of vehicle65%
Deactivations 3 maps
- Lambda Sensor (1=ON, 0=OFF)2 maps · 45%
- Catalytic converter Diagnosis (1=ON, 0=OFF)31%
How this pack differs from other Bosch ME7.1.1 packs
Named here, but by under half of the 106 Bosch ME7.1.1 packs (14 of 19, the rarest first):
- Variable geometry (VGT) or wastegate (WG) control 2%
- Linearization of impulsive turbo pressure 10%
- Limiter of Turbo pressure 11%
- Correction of slow incremental factor of turbo pressure 12%
- Fast reduction factor of turbo pressure 12%
- Limiter of impulsive turbo pressure 12%
- Slow incremental factor of turbo pressure 12%
- Limiter of steady turbo pressure 13%
- Torque request during take off condition - Reverse Gear 13%
- Phase of injection 18%
- Torque monitoring 20%
- Spark advance during cranking 25%
- Catalytic converter Diagnosis (1=ON, 0=OFF) 31%
- Reference of maximum throttle valve angle 37%
Named by at least half of them, but not by this pack:
- Torque request during take off condition 63%
- Exhaust gas temperature 58%
- Injection correction 58%
- Torque request - Reverse Gear 58%
49 maps against the Bosch ME7.1.1 median
The 106 Bosch ME7.1.1 packs name 13 to 149 maps, median 42.5; 68% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 13 | 6 |
| Spark Advance | 9 | 9 |
| Turbo System | 9 | 0 |
| Injection System | 6 | 6 |
| Air Control | 6 | 6 |
| Limiters | 3 | 9 |
| Deactivations | 3 | 0 |
Other SW versions on HW 0261207857
6 SW versions sit on this HW in the archive, 11 files in all: Audi RS6 (10), Volkswagen Golf 4 (1). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037366362 | Audi RS6 4.2 V8 BITURBO 450hp | none listed |
| 1037366478 | Audi RS6 4.2 450hp | none listed |
| 1037367265 | Audi RS6 4.2 V8 BITURBO 450hp | none listed |
| 1037367564 | Audi RS6 4.2 450hp | none listed |
| 1037367724 | Audi RS6 4.2 V8 BITURBO 450hp | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.