Delphi DCM3.7 map pack – Great Wall Hover 2.0 143hp
Engine Torque18Turbo System6Injection System5Air Control4Rail4
This pack holds 37 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Great Wall Hover 2.0 143hp · Delphi DCM3.7
More packs: Great Wall Hover · Delphi DCM3.7
All 37 maps
The percentage beside a name: the share of the 126 Delphi DCM3.7 packs that name it too.
Engine Torque 18 maps
- Limiter of Maximum torque7 maps · 96%
- Optimal engine torque8 maps · 56%
- Torque limiter at gearbox input2 maps · 47%
- Torque during cranking f(RPM,ECT)23%
Turbo System 6 maps
- Limiter of Turbo pressure83%
- Turbo pressure3 maps · 75%
- Variable geometry (VGT) or wastegate (WG) control2 maps · 71%
Injection System 5 maps
- Injection time96%
- Fuel quantity injected f(RPM,Trq)4 maps · 24%
Air Control 4 maps
- Air quantity - Base map4 maps · 22%
Rail 4 maps
- Rail pressure3 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)98%
How this pack differs from other Delphi DCM3.7 packs
Named here, but by under half of the 126 Delphi DCM3.7 packs:
- Air quantity - Base map 22%
- Torque during cranking f(RPM,ECT) 23%
- Fuel quantity injected f(RPM,Trq) 24%
- Torque limiter at gearbox input 47%
Named by at least half of them, but not by this pack:
- Rail pressure limiter f(RPM,Fuel_T) 75%
- Smoke limitation - Lower Lambda value 67%
- Maximum speed of vehicle 56%
37 maps against the Delphi DCM3.7 median
The 126 Delphi DCM3.7 packs name 18 to 85 maps, median 43; 20% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 18 | 13 |
| Turbo System | 6 | 7 |
| Injection System | 5 | 6 |
| Air Control | 4 | 1 |
| Rail | 4 | 12 |
| Limiters | 0 | 2 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.