−10%10% off all files right now — originals €18, map packs from €54.
€18 / file−10%

Volvo XC40 WinOLS map packs

The Volvo XC40 has 2 map packs, all on the Bosch MG1CS080. 2 engines, among them 1.5 163hp and 1.5 130hp. A pack names 56–57 maps and costs €63, the original .bin included.

No HW or SW number is on record for these packs: go by the engine and the ECU type.

Volvo XC40 packs by ECU type

2 packs €63 · original + map pack · card · by e-mail

What the maps are

Map groups, with how many packs have them: Variable Valve Timing (VVT) (2), Air Control (2), Turbo System (2), Engine Torque (2) and Spark Advance (2).

Limiter of Turbo pressure2 of 2Intake2 of 2Spark Advance base map2 of 2Maximum compressor speed2 of 2Compressor efficiency2 of 2Torque request during take off condition2 of 2Lambda for component protection2 of 2Volumetric efficiency2 of 2Wastegate Duty Cycle2 of 2Limiter of knocking sensor2 of 2Limiter of Maximum torque2 of 2Requested engine load2 of 2Exhaust gas temperature2 of 2Turbo pressure2 of 2

How to import a CSV map pack into WinOLS

More Volvo map packs

Before you buy

What is in a map pack for the Volvo XC40?

The original .bin of that software version and a CSV for WinOLS that names its maps, with X/Y axes and factors, in one ZIP by e-mail. Map definitions only, no tuned values.

Which one is mine?

These packs list no HW or SW number. Go by the engine and the ECU type, and read the pack's map list before you pay.

What does it cost?

€63, the original .bin included. Card through Stripe, no account, delivered by e-mail. All sales are final: open the pack's page and compare its numbers and its maps before you pay.

Just the file? Every Volvo XC40 original file · Every Volvo pack