FPT Industrial Gensets WinOLS map packs

The FPT Industrial Gensets has 2 map packs, all on the Bosch MD1CE101. Engine: 6.7 299hp. A pack names 101 maps and costs €81, the original .bin included.

Ctrl+F your ECU's HW or SW number: a pack fits only the software version it names.

FPT Industrial Gensets packs by ECU type

2 packs €81 · original + map pack · card · by e-mail

Bosch MD1CE1012 packs

6.7 299hpNEF

6.7 299hp

What the maps are

Map groups, with how many packs have them: Turbo System (2), Limiters (2), Rail (2), Engine Torque (2) and Injection System (2).

Rail pressure2 of 2Fuel quantity injected f(RPM,Trq)2 of 2Injection timing - Main Injection Base Map 12 of 2Smoke limitation - Lower Lambda value2 of 2Limiter of Maximum torque f(APS)2 of 2Limiter of Turbo pressure2 of 2Turbo pressure2 of 2Variable Geometry Duty Cycle2 of 2Torque during cranking f(RPM,ECT)2 of 2Injection timing - Main Injection Base Map 22 of 2Idle engine speed f(ECT)2 of 2Fuel quantity limiter2 of 2Limiter of Maximum torque2 of 2Injection base map2 of 2Rail pressure limiter2 of 2Limiter of Maximum torque in case of system error2 of 2Injection time2 of 2Maximum torque limiter f(fuel_T)2 of 2

How to import a CSV map pack into WinOLS

Before you buy

What is in a map pack for the FPT Industrial Gensets?

The original .bin of that software version and a CSV for WinOLS that names its maps, with X/Y axes and factors, in one ZIP by e-mail. Map definitions only, no tuned values.

Which one is mine?

The one whose HW or SW number matches your read. The same car and engine can run other software, and a pack fits only the version it names.

What does it cost?

€81, the original .bin included. Card through Stripe, no account, delivered by e-mail. All sales are final: open the pack's page and compare its numbers and its maps before you pay.

Just the file? Every FPT Industrial Gensets original file · Every FPT Industrial pack