CAN-AM Maverick X3 WinOLS map packs

The CAN-AM Maverick X3 has 2 map packs, all on the Bosch ME17.8.5. Engine: 0.9 154hp. A pack names 84–139 maps and costs €72, the original .bin included.

Ctrl+F your ECU's HW or SW number: a pack fits only the software version it names.

CAN-AM Maverick X3 packs by ECU type

2 packs €72 · original + map pack · card · by e-mail

Bosch ME17.8.52 packs

0.9 154hp

0.9 154hp

What the maps are

Map groups, with how many packs have them: Air Control (2), Turbo System (2), Limiters (2), Engine Torque (2) and Spark Advance (2).

Limiter of Turbo pressure2 of 2Injection enrichment2 of 2Limiter of steady turbo pressure2 of 2RPM Limiter2 of 2Limiter of impulsive turbo pressure2 of 2Airflow mass through throttle valve2 of 2Idle engine speed2 of 2Optimal engine torque2 of 2Injection base map2 of 2Desired engine load - Mode 22 of 2Maximum speed of vehicle2 of 2Torque request - Mode 12 of 2Torque during cranking f(RPM,ECT)2 of 2Spark Advance base map2 of 2Calculated engine torque2 of 2Lambda for component protection2 of 2Wastegate Duty Cycle2 of 2Requested engine load2 of 2Turbo pressure2 of 2Desired engine load - Mode 12 of 2Limiter of Turbo pressure f(IAT)2 of 2Phase of injection2 of 2Factor Injection correction f(ECT)2 of 2Exhaust gas temperature2 of 2

How to import a CSV map pack into WinOLS

Before you buy

What is in a map pack for the CAN-AM Maverick X3?

The original .bin of that software version and a CSV for WinOLS that names its maps, with X/Y axes and factors, in one ZIP by e-mail. Map definitions only, no tuned values.

Which one is mine?

The one whose HW or SW number matches your read. The same car and engine can run other software, and a pack fits only the version it names.

What does it cost?

€72, the original .bin included. Card through Stripe, no account, delivered by e-mail. All sales are final: open the pack's page and compare its numbers and its maps before you pay.

Just the file? Every CAN-AM Maverick X3 original file · Every CAN-AM pack