Bosch MED9.7 WinOLS map packs
4 software versions of the Bosch MED9.7 with a map pack (mappack), the original included. Open one to see every map.
What a Bosch MED9.7 map pack holds
One CSV for WinOLS with the maps of that exact software version: their names, categories, X/Y axes and factors, next to the original .bin in the same ZIP. It is not a DAMOS or A2L, and it holds no tuned values.
How to import a CSV map pack into WinOLS · All Bosch MED9.7 original files
Maps most packs have
Throttle valve - operating angle100%RPM Limiter100%Requested Lambda100%Airflow mass through throttle valve100%Optimal engine torque100%Injection correction f(Air_T)100%Spark Advance base map100%Torque request during take off condition100%Lambda for component protection100%Requested engine load100%Optimal Spark Advance100%Catalytic converter Diagnosis (1=ON, 0=OFF)75%Limiter of knocking sensor75%Maximum speed of vehicle75%Lambda Sensor (1=ON, 0=OFF)75%RPM limiter (higher threshold)75%Spark Advance at full load75%Injection base map75%Spark advance during cranking75%Minimum Spark Advance50%Idle engine speed f(ECT)50%Torque monitoring50%Threshold of end limitation on throttle valve angle50%Injector offset dependent on voltage50%Rail pressure limiter f(RPM,Fuel_Q)50%Limiter of Maximum torque50%Conversion of relative fuel mass into effective injection time50%Exhaust50%Throttle valve f(Accelerator pedal)50%Intake50%Injection correction50%Engine load limiter50%Rail pressure50%Exhaust gas temperature50%