Bosch ME7.6.3 WinOLS map packs
4 software versions of the Bosch ME7.6.3 with a map pack (mappack), the original included. Open one to see every map.
What a Bosch ME7.6.3 map pack holds
One CSV for WinOLS with the maps of that exact software version: their names, categories, X/Y axes and factors, next to the original .bin in the same ZIP. It is not a DAMOS or A2L, and it holds no tuned values.
How to import a CSV map pack into WinOLS · All Bosch ME7.6.3 original files
Maps most packs have
Throttle valve - operating angle100%RPM Limiter100%Airflow mass through throttle valve100%Optimal engine torque100%Injection at partial load100%Torque request during take off condition100%Lambda for component protection100%Requested engine load100%RPM limiter (higher threshold)100%Optimal Spark Advance100%Limiter of Turbo pressure75%Torque request - Low speed75%Requested Lambda75%Torque request - Low speed Sport75%Injection correction f(Air_T)75%Lambda Sensor (1=ON, 0=OFF)75%Spark Advance base map75%Torque request during take off condition - Reverse Gear75%Turbo pressure75%Engine load limiter75%Torque request during take off condition - Automatic Transmission75%Minimum Spark Advance50%Idle engine speed f(ECT)50%MAF sensor slope50%Torque monitoring50%Injector offset dependent on voltage50%Idle engine speed50%Conversion of relative fuel mass into effective injection time50%Limiter of knocking sensor50%Torque request during take off condition - Sport50%Injection correction50%Wastegate Duty Cycle50%Limiter of Turbo pressure f(IAT)50%Exhaust gas temperature50%Factor Injection correction f(ECT)50%