Bosch ME7.6.2 WinOLS map packs

24 software versions of the Bosch ME7.6.2 with a map pack (mappack), the original included. Open one to see every map.

What a Bosch ME7.6.2 map pack holds

One CSV for WinOLS with the maps of that exact software version: their names, categories, X/Y axes and factors, next to the original .bin in the same ZIP. It is not a DAMOS or A2L, and it holds no tuned values.

How to import a CSV map pack into WinOLS · All Bosch ME7.6.2 original files

Maps most packs have

RPM Limiter100%Requested Lambda100%Optimal Spark Advance100%Injection at partial load100%Lambda for component protection100%RPM limiter (higher threshold)100%Throttle valve - operating angle96%Airflow mass through throttle valve96%Optimal engine torque96%Spark Advance base map96%Torque request during take off condition96%Requested engine load96%Injection correction f(Air_T)88%Maximum speed of vehicle83%Torque request during take off condition - Automatic Transmission83%Torque request - Low speed79%Torque request - Low speed Sport79%Injection base map75%Lambda Sensor (1=ON, 0=OFF)75%Factor Injection correction f(ECT)75%Torque request during take off condition - Reverse Gear71%Limiter of Turbo pressure62%Torque request for Sport mode functionality A50%Torque request for Sport mode functionality B50%Catalytic converter Diagnosis (1=ON, 0=OFF)46%Minimum Spark Advance46%Torque monitoring46%Limiter of knocking sensor46%Idle engine speed46%Linearization of impulsive turbo pressure42%Turbo pressure42%Limiter of differential Turbo pressure f(APS)42%MAF sensor slope29%Injection correction25%Idle engine speed f(ECT)25%Exhaust gas temperature25%Torque request during take off condition - Sport21%Wastegate Duty Cycle21%Limiter of Maximum torque17%Injector offset dependent on voltage12%

Bosch ME7.6.2 WinOLS map packs

What a Bosch ME7.6.2 map pack holds

Maps most packs have

Bosch ME7.6.2 files with a map pack