Bosch ME7.5.10 WinOLS map packs

19 software versions of the Bosch ME7.5.10 with a map pack (mappack), the original included. Open one to see every map.

What a Bosch ME7.5.10 map pack holds

One CSV for WinOLS with the maps of that exact software version: their names, categories, X/Y axes and factors, next to the original .bin in the same ZIP. It is not a DAMOS or A2L, and it holds no tuned values.

How to import a CSV map pack into WinOLS · All Bosch ME7.5.10 original files

Maps most packs have

RPM Limiter100%Requested Lambda100%Threshold of end limitation on throttle valve angle100%Airflow mass through throttle valve100%Optimal engine torque100%Maximum speed of vehicle100%Injection at partial load100%Spark Advance base map100%Lambda for component protection100%Requested engine load100%Optimal Spark Advance100%Lambda Sensor (1=ON, 0=OFF)95%Injection enrichment84%Factor Injection correction f(ECT)84%Calculated engine torque84%Reference of maximum throttle valve angle74%Torque request during take off condition74%Catalytic converter Diagnosis (1=ON, 0=OFF)74%RPM limiter (lower threshold)74%Torque request during take off condition - Reverse Gear58%RPM limiter (higher threshold)58%Throttle valve53%Exhaust Gas Valve (1=ON, 0=OFF)47%Phase of injection42%Throttle valve - operating angle37%Torque request - Low speed26%Torque request during standard condition26%Minimum Spark Advance21%Speed limiters (switch)16%Idle engine speed f(ECT)16%Torque monitoring16%Limiter of knocking sensor16%Throttle valve f(Accelerator pedal)16%Injection correction16%Spark advance correction f(Air_T)16%Exhaust gas temperature16%Torque request - High speed11%

Bosch ME7.5.10 WinOLS map packs

What a Bosch ME7.5.10 map pack holds

Maps most packs have

Bosch ME7.5.10 files with a map pack