8K0907551_0005 Siemens SIMOS 8.4 map pack – Audi S5 3.0 333hp
CAL
8K0907551_0005Engine Torque34Air Control29Spark Advance20Injection System14Limiters12Volumetric System6Rail3
This pack holds 118 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S5 3.0 333hp · Siemens SIMOS 8.4
More packs: Audi S5 · Siemens SIMOS 8.4
All 118 maps
The percentage beside a name: the share of the 5 Siemens SIMOS 8.4 packs that name it too.
Engine Torque 34 maps
- Calculated engine torque100%
- Limiter of Maximum torque11 maps · 100%
- Optimal engine torque100%
- Torque limiter for clutch protection2 maps · 100%
- Torque limiter for vehicle speed100%
- Torque request during take off condition100%
- Torque request during take off condition - Automatic Transmission2 maps · 100%
- Torque request - High speed3 maps · 80%
- Torque request - Low speed3 maps · 80%
- Torque request - Reverse Gear80%
- Torque request during standard condition2 maps · 60%
- Maximum torque limiter f(gear)2 maps · 40%
- Torque request - High speed AT2 maps · 20%
- Torque request - Low speed AT2 maps · 20%
Air Control 29 maps
- Air quantity - Base map2 maps · 100%
- Engine load limiter100%
- Exhaust gas temperature8 maps · 100%
- MAF100%
- Requested engine load100%
- Throttle valve2 maps · 100%
- Max value of catalyst temperature to enable diagnosis2 maps · 40%
- Maximum allowable exhaust gas temperature for spark retard control2 maps · 40%
- Maximum MAP sensor40%
- Maximum relative air charge for catalyst diagnosis40%
- Maximum thermal cutoff - TCO40%
- Minimum relative air charge for catalyst diagnosis40%
- Minimum thermal cutoff - TCO40%
- Thermal cutoff - TCO sensor5 maps · 40%
Spark Advance 20 maps
- Optimal Spark Advance7 maps · 100%
- Spark Advance base map5 maps · 100%
- DWELL40%
- Minimum Spark Advance3 maps · 40%
- Permissible retard before catalyst overheating prevention40%
- Spark retard at recognised knocking3 maps · 40%
Injection System 14 maps
- Injection base map2 maps · 100%
- Injection correction2 maps · 100%
- Injection enrichment100%
- Requested Lambda6 maps · 100%
- Injection at full load60%
- Lambda for component protection40%
- Limiter of Lambda A40%
Limiters 12 maps
- Maximum speed of vehicle4 maps · 100%
- RPM Limiter8 maps · 100%
Volumetric System 6 maps
- Volumetric pressure5 maps · 100%
- Transmission ratio supercharger-crankshaft40%
Rail 3 maps
- Rail pressure3 maps · 100%
How this pack differs from other Siemens SIMOS 8.4 packs
Named here, but by under half of the 5 Siemens SIMOS 8.4 packs (14 of 18, the rarest first):
- Torque request - High speed AT 20%
- Torque request - Low speed AT 20%
- DWELL 40%
- Lambda for component protection 40%
- Limiter of Lambda A 40%
- Max value of catalyst temperature to enable diagnosis 40%
- Maximum MAP sensor 40%
- Maximum allowable exhaust gas temperature for spark retard control 40%
- Maximum relative air charge for catalyst diagnosis 40%
- Maximum thermal cutoff - TCO 40%
- Maximum torque limiter f(gear) 40%
- Minimum Spark Advance 40%
- Minimum relative air charge for catalyst diagnosis 40%
- Minimum thermal cutoff - TCO 40%
118 maps against the Siemens SIMOS 8.4 median
The 5 Siemens SIMOS 8.4 packs name 73 to 118 maps, median 76; 80% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 34 | 25 |
| Air Control | 29 | 10 |
| Spark Advance | 20 | 11 |
| Injection System | 14 | 12 |
| Limiters | 12 | 12 |
| Volumetric System | 6 | 5 |
| Rail | 3 | 3 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.