00000C9D061800 00000CAA01361D Bosch EDC17C56 map pack – BMW 5 Series 3.0 258hp
00000C9D061800SW00000CAA01361DCAL00000C9D061800_00000CAA01361D_00001949361D04UPG00001949361D04This pack holds 216 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 5 Series 3.0 258hp · Bosch EDC17C56
More packs: BMW 5 Series · Bosch EDC17C56
All 216 maps
The percentage beside a name: the share of the 54 Bosch EDC17C56 packs that name it too.
Rail 83 maps
- Rail pressure4 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)78 maps · 100%
- Rail pressure limiter f(RPM,Fuel_T)100%
Engine Torque 41 maps
- Limiter of Maximum torque10 maps · 100%
- Maximum torque for fifth gear100%
- Torque during cranking f(RPM,ECT)2 maps · 100%
- Torque limiter for vehicle speed4 maps · 100%
- Maximum torque for sixth gear98%
- Limiter of Maximum torque f(APS)96%
- Maximum torque for seventh gear3 maps · 93%
- Torque request during take off condition93%
- Calculated engine torque3 maps · 87%
- Maximum torque for first gear87%
- Maximum torque for forth gear87%
- Maximum torque for second gear87%
- Maximum torque for third gear87%
- Torque request during standard condition87%
- Maximum torque limiter f(fuel_T)2 maps · 76%
- Torque limiter at gearbox input76%
- Engine torque correction2 maps · 74%
- Maximum engine torque correction f(eng_T)4 maps · 74%
- Maximum torque for reverse gear72%
Injection System 40 maps
- Fuel quantity injected f(RPM,Trq)8 maps · 100%
- Injection timing - Main Injection Base Map 14 maps · 100%
- Smoke limitation - Lower Lambda value15 maps · 98%
- Fuel quantity limiter2 maps · 80%
- Injection timing - Main Injection Base Map 25 maps · 67%
- Injection timing limiter - Main injection base map3 maps · 41%
- Injection timing - Main Injection Base Map 424%
- Injection timing - Main Injection Base Map 524%
- Phase of injection11%
Turbo System 30 maps
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure15 maps · 100%
- Variable Geometry Duty Cycle13 maps · 98%
- Limiter of Turbo pressure41%
Deactivations 10 maps
- EGR Valve10 maps · 63%
Limiters 8 maps
- Maximum speed of vehicle100%
- Idle engine speed f(ECT)7 maps · 98%
Air Control 4 maps
- Exhaust gas temperature2 maps · 81%
- Air quantity - Base map2 maps · 33%
How this pack differs from other Bosch EDC17C56 packs
Named here, but by under half of the 54 Bosch EDC17C56 packs:
- Phase of injection 11%
- Injection timing - Main Injection Base Map 4 24%
- Injection timing - Main Injection Base Map 5 24%
- Air quantity - Base map 33%
- Injection timing limiter - Main injection base map 41%
- Limiter of Turbo pressure 41%
Named by at least half of them, but not by this pack:
- Injection time 87%
216 maps against the Bosch EDC17C56 median
The 54 Bosch EDC17C56 packs name 79 to 222 maps, median 200; 63% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Rail | 83 | 81 |
| Engine Torque | 41 | 42 |
| Injection System | 40 | 32 |
| Turbo System | 30 | 29.5 |
| Deactivations | 10 | 10 |
| Limiters | 8 | 8 |
| Air Control | 4 | 2 |
Other SW versions on HW 00000C9D061800
6 SW versions sit on this HW in the archive, 467 files in all: BMW 5 Series (231), BMW 3 Series (90), BMW X Series (81). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 00000CAA460200 | BMW 5 Series 3.0 258hp | 200 maps |
| 00000CAA460B00 | BMW 5 Series 3.0 258hp | none listed |
| 00000CAA461500 | BMW 5 Series 2.0 184hp N47D20O1 · Bosch EDC17C56 DDE741a | 200 maps |
| 00000CAA461301 | BMW X Series 3.0 258hp | none listed |
| 00000CAA461700 | BMW 3 Series 3.0 258hp N57D30A | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.