Bosch MED9.1 map pack – Audi S5 4.2 V8 FSI 354hp
Spark Advance40Engine Torque19Limiters17Injection System12Air Control10Rail6Deactivations2
This pack holds 106 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S5 4.2 V8 FSI 354hp · Bosch MED9.1
More packs: Audi S5 · Bosch MED9.1
All 106 maps
The percentage beside a name: the share of the 152 Bosch MED9.1 packs that name it too.
Spark Advance 40 maps
- Spark Advance base map24 maps · 99%
- Optimal Spark Advance8 maps · 50%
- Limiter of knocking sensor8 maps · 41%
Engine Torque 19 maps
- Optimal engine torque2 maps · 100%
- Calculated engine torque69%
- Torque monitoring10 maps · 49%
- Engine torque correction40%
- Torque request during standard condition5 maps · 36%
Limiters 17 maps
- RPM Limiter3 maps · 99%
- RPM limiter (higher threshold)7 maps · 97%
- Maximum speed of vehicle91%
- RPM limiter (lower threshold)6 maps · 3%
Injection System 12 maps
- Requested Lambda99%
- Injection correction5 maps · 65%
- Injection enrichment61%
- Lambda for component protection2 maps · 53%
- Injection at partial load3 maps · 8%
Air Control 10 maps
- Requested engine load2 maps · 99%
- Airflow mass through throttle valve2 maps · 95%
- Threshold of end limitation on throttle valve angle95%
- Throttle valve - operating angle95%
- Throttle valve f(Accelerator pedal)85%
- Exhaust gas temperature2 maps · 64%
- Engine load limiter56%
Rail 6 maps
- Rail pressure5 maps · 67%
- Rail pressure limiter f(RPM,Fuel_T)38%
Deactivations 2 maps
- Lambda Sensor (1=ON, 0=OFF)66%
- Catalytic converter Diagnosis (1=ON, 0=OFF)62%
How this pack differs from other Bosch MED9.1 packs
Named here, but by under half of the 152 Bosch MED9.1 packs:
- RPM limiter (lower threshold) 3%
- Injection at partial load 8%
- Torque request during standard condition 36%
- Rail pressure limiter f(RPM,Fuel_T) 38%
- Engine torque correction 40%
- Limiter of knocking sensor 41%
- Torque monitoring 49%
Named by at least half of them, but not by this pack (14 of 22, the commonest first):
- Spark advance during cranking 86%
- Limiter of Turbo pressure 79%
- Turbo pressure 79%
- Desired torque at wheel 75%
- Limiter of impulsive turbo pressure 75%
- Injection base map 74%
- Slow incremental factor of turbo pressure 72%
- Correction of turbo pressure f(IAT) 72%
- Correction of slow incremental factor of turbo pressure 71%
- Fast reduction factor of turbo pressure 71%
- Limiter of steady turbo pressure 68%
- Correction of impulsive turbo pressure f(IAT) 65%
- Limiter of Maximum torque 56%
- Linearization of impulsive turbo pressure 56%
106 maps against the Bosch MED9.1 median
The 152 Bosch MED9.1 packs name 27 to 213 maps, median 94.5; 55% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Spark Advance | 40 | 22 |
| Engine Torque | 19 | 15 |
| Limiters | 17 | 17 |
| Injection System | 12 | 11 |
| Air Control | 10 | 9 |
| Rail | 6 | 6 |
| Deactivations | 2 | 2 |
| Turbo System | 0 | 20 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.