00000C9D061800 00000CAA461301 Bosch EDC17C56 map pack – BMW X Series 3.0 258hp
00000C9D061800SW00000CAA461301CAL00000C9D061800_00000CAA461301_00000D68461334UPG00000D68461334This pack holds 85 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW X Series 3.0 258hp · Bosch EDC17C56
More packs: BMW X Series · Bosch EDC17C56
All 85 maps
The percentage beside a name: the share of the 54 Bosch EDC17C56 packs that name it too.
Engine Torque 29 maps
- Limiter of Maximum torque9 maps · 100%
- Maximum torque for fifth gear100%
- Torque during cranking f(RPM,ECT)100%
- Torque limiter for vehicle speed4 maps · 100%
- Maximum torque for sixth gear98%
- Limiter of Maximum torque f(APS)96%
- Maximum torque for seventh gear3 maps · 93%
- Torque request during take off condition93%
- Calculated engine torque2 maps · 87%
- Maximum torque for first gear87%
- Maximum torque for forth gear87%
- Maximum torque for second gear87%
- Maximum torque for third gear87%
- Torque request during standard condition87%
- Maximum torque for reverse gear72%
Injection System 23 maps
- Fuel quantity injected f(RPM,Trq)8 maps · 100%
- Injection timing - Main Injection Base Map 1100%
- Smoke limitation - Lower Lambda value9 maps · 98%
- Injection time87%
- Injection timing - Main Injection Base Map 267%
- Injection timing - Main Injection Base Map 341%
- Injection timing - Main Injection Base Map 424%
- Injection timing - Main Injection Base Map 524%
Turbo System 21 maps
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure9 maps · 100%
- Variable Geometry Duty Cycle10 maps · 98%
- Limiter of Turbo pressure41%
Rail 7 maps
- Rail pressure4 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_T)100%
Limiters 3 maps
- Maximum speed of vehicle100%
- Idle engine speed f(ECT)2 maps · 98%
Air Control 2 maps
- Air quantity - Base map2 maps · 33%
How this pack differs from other Bosch EDC17C56 packs
Named here, but by under half of the 54 Bosch EDC17C56 packs:
- Injection timing - Main Injection Base Map 4 24%
- Injection timing - Main Injection Base Map 5 24%
- Air quantity - Base map 33%
- Injection timing - Main Injection Base Map 3 41%
- Limiter of Turbo pressure 41%
Named by at least half of them, but not by this pack:
- Exhaust gas temperature 81%
- Fuel quantity limiter 80%
- Maximum torque limiter f(fuel_T) 76%
- Torque limiter at gearbox input 76%
- Engine torque correction 74%
- Maximum engine torque correction f(eng_T) 74%
- EGR Valve 63%
85 maps against the Bosch EDC17C56 median
The 54 Bosch EDC17C56 packs name 79 to 222 maps, median 200; 6% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 29 | 42 |
| Injection System | 23 | 32 |
| Turbo System | 21 | 29.5 |
| Rail | 7 | 81 |
| Limiters | 3 | 8 |
| Air Control | 2 | 2 |
| Deactivations | 0 | 10 |
Other SW versions on HW 00000C9D061800
6 SW versions sit on this HW in the archive, 467 files in all: BMW 5 Series (231), BMW 3 Series (90), BMW X Series (81). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 00000CAA01361D | BMW X Series 3.0 258hp N57D30A · Bosch EDC17C56 DDE741a | none listed |
| 00000CAA460200 | BMW X Series 3.0 258hp N57D30A | none listed |
| 00000CAA460B00 | BMW X Series 3.0 258hp N57D30A | 139 maps |
| 00000CAA461500 | BMW X Series 2.0 184hp N47D20O1 | 200 maps |
| 00000CAA461700 | BMW X Series 3.0 258hp N57D30A · Bosch EDC17C56 DDE741a | 217 maps |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.