0261S02544 1037386837 Bosch MED9.1 map pack – Audi S3 2.0 265hp
HW
0261S02544SW1037386837CAL8P0907115R_0010Turbo System24Limiters18Spark Advance17Engine Torque16Injection System12Deactivations11Air Control8Rail6
This pack holds 112 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S3 2.0 265hp · Bosch MED9.1
Also written: 1 037 386 837
More packs: Audi S3 · Bosch MED9.1
All 112 maps
The percentage beside a name: the share of the 152 Bosch MED9.1 packs that name it too.
Turbo System 24 maps
- Limiter of Turbo pressure79%
- Turbo pressure2 maps · 79%
- Limiter of impulsive turbo pressure3 maps · 75%
- Correction of turbo pressure f(IAT)5 maps · 72%
- Slow incremental factor of turbo pressure72%
- Correction of slow incremental factor of turbo pressure71%
- Fast reduction factor of turbo pressure71%
- Limiter of steady turbo pressure3 maps · 68%
- Correction of impulsive turbo pressure f(IAT)4 maps · 65%
- Linearization of impulsive turbo pressure56%
- Limiter of Turbo pressure f(APS)53%
- Limiter of Turbo pressure f(IAT)43%
Limiters 18 maps
- RPM Limiter12 maps · 99%
- RPM limiter (higher threshold)2 maps · 97%
- Maximum speed of vehicle4 maps · 91%
Spark Advance 17 maps
- Spark Advance base map12 maps · 99%
- Spark advance during cranking86%
- Optimal Spark Advance4 maps · 50%
Engine Torque 16 maps
- Optimal engine torque2 maps · 100%
- Desired torque at wheel75%
- Calculated engine torque6 maps · 69%
- Limiter of Maximum torque56%
- Torque request - Low speed3 maps · 43%
- Torque request during standard condition36%
- Torque request - High speed2 maps · 32%
Injection System 12 maps
- Requested Lambda3 maps · 99%
- Injection base map74%
- Injection correction65%
- Injection enrichment61%
- Lambda for component protection6 maps · 53%
Deactivations 11 maps
- Lambda Sensor (1=ON, 0=OFF)9 maps · 66%
- Catalytic converter Diagnosis (1=ON, 0=OFF)2 maps · 62%
Air Control 8 maps
- Requested engine load99%
- Airflow mass through throttle valve95%
- Threshold of end limitation on throttle valve angle95%
- Throttle valve - operating angle95%
- Throttle valve f(Accelerator pedal)85%
- Exhaust gas temperature2 maps · 64%
- Engine load limiter56%
Rail 6 maps
- Rail pressure5 maps · 67%
- Rail pressure limiter f(RPM,Fuel_Q)51%
How this pack differs from other Bosch MED9.1 packs
Named here, but by under half of the 152 Bosch MED9.1 packs:
- Torque request - High speed 32%
- Torque request during standard condition 36%
- Torque request - Low speed 43%
- Limiter of Turbo pressure f(IAT) 43%
Named by at least half of them, but not by this pack:
- Torque request during take off condition - Fifth Gear 53%
- Torque request during take off condition - First Gear 53%
- Torque request during take off condition - Forth Gear 53%
- Torque request during take off condition - Second Gear 53%
- Torque request during take off condition - Third Gear 53%
- Torque request during take off condition - Reverse Gear 51%
112 maps against the Bosch MED9.1 median
The 152 Bosch MED9.1 packs name 27 to 213 maps, median 94.5; 58% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 24 | 20 |
| Limiters | 18 | 17 |
| Spark Advance | 17 | 22 |
| Engine Torque | 16 | 15 |
| Injection System | 12 | 11 |
| Deactivations | 11 | 2 |
| Air Control | 8 | 9 |
| Rail | 6 | 6 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.