10324281AA 8S0906259K_0001 Siemens SIMOS 18.1 map pack – Audi TT 2.0 230hp
SW
10324281AACAL8S0906259K_0001Engine Torque117Spark Advance107Air Control27Limiters26Turbo System19Rail13Injection System8Deactivations1
This pack holds 318 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi TT 2.0 230hp · Siemens SIMOS 18.1
More packs: Audi TT · Siemens SIMOS 18.1
All 318 maps
The percentage beside a name: the share of the 48 Siemens SIMOS 18.1 packs that name it too.
Engine Torque 117 maps
- Calculated engine torque100%
- Limiter of Maximum torque60 maps · 100%
- Optimal engine torque25 maps · 100%
- Torque limiter for clutch protection2 maps · 100%
- Torque request during standard condition23 maps · 96%
- Torque request during take off condition4 maps · 62%
- Torque request during take off condition - Automatic Transmission2 maps · 44%
Spark Advance 107 maps
- Optimal Spark Advance38 maps · 100%
- Spark Advance base map37 maps · 100%
- Minimum Spark Advance32 maps · 85%
Air Control 27 maps
- Reference of maximum throttle valve angle100%
- Requested engine load24 maps · 100%
- Throttle valve98%
- Exhaust gas temperature96%
Limiters 26 maps
- Maximum speed of vehicle11 maps · 100%
- RPM Limiter6 maps · 100%
- RPM limiter (higher threshold)7 maps · 92%
- RPM limiter (lower threshold)2 maps · 77%
Turbo System 19 maps
- Limiter of Turbo pressure8 maps · 100%
- Linearization of impulsive turbo pressure2 maps · 100%
- Wastegate Duty Cycle4 maps · 100%
- Limiter of impulsive turbo pressure2 maps · 96%
- Correction of impulsive turbo pressure f(IAT)90%
- Turbo pressure2 maps · 58%
Rail 13 maps
- Rail pressure13 maps · 100%
Injection System 8 maps
- Injection at full load2 maps · 100%
- Injection base map2 maps · 100%
- Requested Lambda3 maps · 100%
- Lambda for component protection50%
Deactivations 1 map
- Catalytic converter Diagnosis (1=ON, 0=OFF)17%
How this pack differs from other Siemens SIMOS 18.1 packs
Named here, but by under half of the 48 Siemens SIMOS 18.1 packs:
- Catalytic converter Diagnosis (1=ON, 0=OFF) 17%
- Torque request during take off condition - Automatic Transmission 44%
Named by at least half of them, but not by this pack (14 of 28, the commonest first):
- Engine load limiter 92%
- Limiter of knocking sensor 81%
- Threshold of end limitation on throttle valve angle 81%
- Limiter of Lambda B 79%
- Airflow mass through throttle valve 77%
- Deactivation turbocharger protection (1=ON, 0=OFF) 75%
- Engine torque correction 75%
- Limiter of Lambda A 75%
- MAP sensor maximum voltage 75%
- Manual Setpoint MAP 75%
- Minimum MAF sensor 75%
- Threshold for turbocharger speed reduction 75%
- Lambda Sensor (1=ON, 0=OFF) 73%
- Boost pressure deviation for basic charge air pressure too low 71%
318 maps against the Siemens SIMOS 18.1 median
The 48 Siemens SIMOS 18.1 packs name 256 to 467 maps, median 366; 17% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 117 | 119.5 |
| Spark Advance | 107 | 116 |
| Air Control | 27 | 47 |
| Limiters | 26 | 26.5 |
| Turbo System | 19 | 26 |
| Rail | 13 | 13 |
| Injection System | 8 | 10 |
| Deactivations | 1 | 4 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.