00001A830A3B02 00001A841D1401 Bosch MEVD17.2.G map pack S55B30 – BMW M Series 3.0 431hp
00001A830A3B02SW00001A841D1401CAL00001A830A3B02_00001A841D1401_0000260A1D14F2UPG0000260A1D14F2This pack holds 210 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW M Series 3.0 431hp · Bosch MEVD17.2.G
More packs: BMW M Series · Bosch MEVD17.2.G
All 210 maps
The percentage beside a name: the share of the 47 Bosch MEVD17.2.G packs that name it too.
Engine Torque 40 maps
- Limiter of Maximum torque6 maps · 100%
- Optimal engine torque2 maps · 100%
- Engine torque correction91%
- Torque monitoring13 maps · 91%
- Torque request during standard condition10 maps · 89%
- Maximum engine torque correction f(ECT_T)79%
- Torque limiter at gearbox input2 maps · 70%
- Torque limiter for clutch protection4 maps · 70%
- Torque limiter for vehicle speed57%
Variable Valve Timing (VVT) 32 maps
- Exhaust - Catalyst protection9 maps · 100%
- Exhaust - High speed3 maps · 100%
- Exhaust - Low speed2 maps · 100%
- Intake10 maps · 100%
- Intake - Catalyst protection3 maps · 100%
- Intake - High speed3 maps · 100%
- Intake - Low speed2 maps · 98%
Limiters 30 maps
- Maximum speed of vehicle5 maps · 100%
- RPM Limiter7 maps · 100%
- RPM limiter (higher threshold)17 maps · 100%
- Upper speed threshold for leak detection62%
Turbo System 27 maps
- Limiter of Turbo pressure9 maps · 100%
- Wastegate Duty Cycle7 maps · 100%
- Limiter of differential Turbo pressure f(APS)4 maps · 91%
- Turbine efficiency2 maps · 91%
- Overboost duration2 maps · 74%
- Correction of turbo pressure2 maps · 62%
- Lower limit for leakage determination62%
Air Control 23 maps
- Airflow mass through throttle valve100%
- Engine load limiter5 maps · 91%
- Exhaust gas temperature6 maps · 91%
- MAF sensor slope3 maps · 91%
- Reference of maximum throttle valve angle74%
- Volumetric efficiency72%
- MAP sensor slope68%
- EGT sensor scaling60%
- Maximum MAF sensor2 maps · 60%
- Minimum MAF sensor2 maps · 60%
Spark Advance 22 maps
- Spark advance at low load2 maps · 85%
- Spark advance correction f(Air_T)3 maps · 85%
- Spark Advance at full load83%
- Spark Advance base map9 maps · 70%
- Spark advance correction factor f(ECT)68%
- Limiter of knocking sensor6 maps · 60%
Deactivations 20 maps
- Lambda Sensor (1=ON, 0=OFF)20 maps · 87%
Injection System 11 maps
- Injection base map2 maps · 100%
- Injection correction2 maps · 91%
- Injection enrichment85%
- Lambda for component protection4 maps · 85%
- Injection at full load2 maps · 77%
Rail 5 maps
- Rail pressure limiter f(RPM,Fuel_Q)91%
- Rail pressure2 maps · 89%
- Maximum rail pressure setpoint for engine start60%
- Minimum pressure for start of injection60%
How this pack differs from other Bosch MEVD17.2.G packs
Named by at least half of them, but not by this pack:
- Optimal Spark Advance 81%
210 maps against the Bosch MEVD17.2.G median
The 47 Bosch MEVD17.2.G packs name 76 to 257 maps, median 208; 55% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 40 | 48 |
| Variable Valve Timing (VVT) | 32 | 32 |
| Limiters | 30 | 30 |
| Turbo System | 27 | 27 |
| Air Control | 23 | 23 |
| Spark Advance | 22 | 18 |
| Deactivations | 20 | 19 |
| Injection System | 11 | 11 |
| Rail | 5 | 5 |
Other SW versions on HW 00001A830A3B02
5 SW versions sit on this HW in the archive, 96 files in all: BMW M Series (94), BMW M4-SERIES (1), BMW 3 Series (1). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 00001A841D0A00 | BMW M Series 3.0 431hp S55B30 | none listed |
| 00001A841D1E01 | BMW M Series 3.0 431hp S55B30 | none listed |
| 00001A841D2801 | BMW M Series 3.0 370hp N55B30T0 | none listed |
| 00001A841D2D02 | BMW M Series 3.0 431hp S55B30 | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.