8N0906018CH_0005 Bosch ME7.5.5 map pack – Audi S3 1.8 20V TURBO 210hp
CAL
8N0906018CH_0005Turbo System11Limiters8Air Control6Spark Advance5Injection System5Engine Torque3Other3
This pack holds 41 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S3 1.8 20V TURBO 210hp · Bosch ME7.5.5
More packs: Audi S3 · Bosch ME7.5.5
All 41 maps
Turbo System 11 maps
- Correction of slow incremental factor of turbo pressure
- Fast reduction factor of turbo pressure
- Limiter of differential Turbo pressure f(APS)
- Limiter of impulsive turbo pressure
- Limiter of steady turbo pressure
- Limiter of Turbo pressure
- Linearization of impulsive turbo pressure
- Slow incremental factor of turbo pressure
- Turbo pressure
- Variable geometry (VGT) or wastegate (WG) control2 maps
Limiters 8 maps
- Maximum speed of vehicle2 maps
- RPM Limiter3 maps
- RPM limiter (higher threshold)
- RPM limiter (lower threshold)2 maps
Air Control 6 maps
- Airflow mass through throttle valve
- Reference of maximum throttle valve angle
- Requested engine load
- Threshold of end limitation on throttle valve angle
- Throttle valve - operating angle
- Throttle valve f(Accelerator pedal)
Spark Advance 5 maps
- Spark Advance base map2 maps
- Spark advance correction f(Trq)2 maps
- Spark advance during cranking
Injection System 5 maps
- Injection correction f(Air_T)
- Limiter of Lambda A
- Phase of injection2 maps
- Requested Lambda
Engine Torque 3 maps
- Optimal engine torque
- Torque request during take off condition
- Torque request during take off condition - Reverse Gear
Other 3 maps
- Lambda Sensor (1=ON3 maps
41 maps against the Bosch ME7.5.5 median
The archive has only 3 Bosch ME7.5.5 packs, with 41 to 69 maps.
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.