Bosch ME9.6 map pack – Saab 93 2.8 250hp
Engine Torque22Deactivations15Spark Advance14Limiters9Injection System5Air Control4Turbo System4
This pack holds 73 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Saab 93 2.8 250hp · Bosch ME9.6
More packs: Saab 93 · Bosch ME9.6
All 73 maps
The percentage beside a name: the share of the 5 Bosch ME9.6 packs that name it too.
Engine Torque 22 maps
- Limiter of Maximum torque2 maps · 100%
- Optimal engine torque100%
- Torque request during take off condition2 maps · 100%
- Calculated engine torque8 maps · 40%
- Torque request - High speed Sport2 maps · 20%
- Torque request - Low speed2 maps · 20%
- Torque request - Low speed Sport2 maps · 20%
- Torque request - Reverse Gear20%
- Torque request during standard condition2 maps · 20%
Deactivations 15 maps
- Catalytic converter Diagnosis (1=ON, 0=OFF)2 maps · 100%
- Lambda Sensor (1=ON, 0=OFF)13 maps · 100%
Spark Advance 14 maps
- Spark Advance base map4 maps · 100%
- Spark advance during cranking2 maps · 100%
- Optimal Spark Advance 18 maps · 20%
Limiters 9 maps
- RPM Limiter6 maps · 100%
- RPM limiter (higher threshold)2 maps · 100%
- Maximum speed of vehicle40%
Injection System 5 maps
- Injection base map100%
- Injection correction f(ECT)2 maps · 100%
- Lambda for component protection100%
- Requested Lambda100%
Air Control 4 maps
- Airflow mass through throttle valve100%
- Requested engine load100%
- Threshold of end limitation on throttle valve angle100%
- Throttle valve - operating angle100%
Turbo System 4 maps
- Limiter of Turbo pressure f(APS)100%
- Linearization of impulsive turbo pressure100%
- Turbo pressure2 maps · 100%
How this pack differs from other Bosch ME9.6 packs
Named here, but by under half of the 5 Bosch ME9.6 packs:
- Optimal Spark Advance 1 20%
- Torque request - High speed Sport 20%
- Torque request - Low speed 20%
- Torque request - Low speed Sport 20%
- Torque request - Reverse Gear 20%
- Torque request during standard condition 20%
- Calculated engine torque 40%
- Maximum speed of vehicle 40%
Named by at least half of them, but not by this pack:
- Injection correction f(Air_T) 80%
- Optimal Spark Advance 80%
- Torque request during take off condition - Reverse Gear 80%
73 maps against the Bosch ME9.6 median
The 5 Bosch ME9.6 packs name 53 to 97 maps, median 53; 60% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 22 | 12 |
| Deactivations | 15 | 4 |
| Spark Advance | 14 | 14 |
| Limiters | 9 | 9 |
| Injection System | 5 | 6 |
| Air Control | 4 | 4 |
| Turbo System | 4 | 4 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.