−10%10% off all files right now — originals €18, map packs from €54.
€18 / file−10%

SC800V3200000 06K997071C_2977 Siemens SIMOS 18 map pack – Volkswagen Jetta 2.0 210hp

SWSC800V3200000CAL06K997071C_2977
Engine Torque117Spark Advance111Air Control37Turbo System26Limiters13Rail12Injection System10Deactivations4

This pack holds 330 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.

Volkswagen Jetta 2.0 210hp · Siemens SIMOS 18

More packs: Volkswagen Jetta · Siemens SIMOS 18

Where do I find these numbers?

All 330 maps

The percentage beside a name: the share of the 16 Siemens SIMOS 18 packs that name it too.

Engine Torque 117 maps

  • Calculated engine torque100%
  • Limiter of Maximum torque69 maps · 100%
  • Optimal engine torque25 maps · 100%
  • Torque limiter for clutch protection4 maps · 100%
  • Torque request during take off condition2 maps · 81%
  • Torque request during standard condition2 maps · 69%
  • Torque request during take off condition - Automatic Transmission5 maps · 69%
  • Torque request - High speed12%
  • Torque request - High speed AT12%
  • Torque request - High speed Sport12%
  • Torque request - Low speed4 maps · 12%
  • Torque request - Low speed AT12%
  • Torque request - Low speed Sport12%

Spark Advance 111 maps

  • Optimal Spark Advance38 maps · 100%
  • Spark Advance base map37 maps · 100%
  • Minimum Spark Advance32 maps · 88%
  • Limiter of knocking sensor4 maps · 62%

Air Control 37 maps

  • Exhaust gas temperature100%
  • Reference of maximum throttle valve angle100%
  • Requested engine load24 maps · 100%
  • Throttle valve100%
  • Engine load limiter4 maps · 94%
  • Manual Setpoint MAP62%
  • MAP sensor maximum voltage62%
  • Maximum MAF sensor62%
  • Minimum MAF sensor62%
  • Threshold of end limitation on throttle valve angle62%
  • Maximum MAP sensor56%

Turbo System 26 maps

  • Limiter of Turbo pressure13 maps · 100%
  • Linearization of impulsive turbo pressure2 maps · 100%
  • Wastegate Duty Cycle4 maps · 100%
  • Correction of impulsive turbo pressure f(IAT)81%
  • Limiter of impulsive turbo pressure2 maps · 81%
  • Minimum pressure difference for basic charge air pressure too low62%
  • Threshold for turbocharger speed reduction62%
  • Turbo pressure2 maps · 56%

Limiters 13 maps

  • Maximum speed of vehicle3 maps · 100%
  • RPM Limiter6 maps · 100%
  • RPM limiter (higher threshold)56%
  • RPM limiter in Neutral3 maps · 44%

Rail 12 maps

  • Rail pressure12 maps · 100%

Injection System 10 maps

  • Injection at full load2 maps · 100%
  • Injection base map2 maps · 100%
  • Requested Lambda4 maps · 100%
  • Lambda for component protection75%
  • Limiter of Lambda B56%

Deactivations 4 maps

  • Deactivation turbocharger protection (1=ON, 0=OFF)2 maps · 62%
  • Lambda Sensor (1=ON, 0=OFF)2 maps · 62%

How this pack differs from other Siemens SIMOS 18 packs

Named here, but by under half of the 16 Siemens SIMOS 18 packs:

  • Torque request - High speed 12%
  • Torque request - High speed AT 12%
  • Torque request - High speed Sport 12%
  • Torque request - Low speed 12%
  • Torque request - Low speed AT 12%
  • Torque request - Low speed Sport 12%
  • RPM limiter in Neutral 44%

Named by at least half of them, but not by this pack:

  • Airflow mass through throttle valve 50%
  • Boost pressure deviation for basic charge air pressure too low 50%
  • Cylinder head temperature 50%
  • Engine torque correction 50%
  • Limiter of Lambda A 50%
  • Maximum allowable exhaust gas temperature for spark retard control 50%
  • Maximum turbocharger temperature 50%
  • Spark advance correction f(Air_T) 50%

330 maps against the Siemens SIMOS 18 median

The 16 Siemens SIMOS 18 packs name 254 to 394 maps, median 340.5; 44% of them name fewer than this one.

CategoryThis packMedian pack
Engine Torque117116
Spark Advance111113.5
Air Control3742
Turbo System2625.5
Limiters1315
Rail1212
Injection System1010
Deactivations44

Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.

Original ECU file Siemens SIMOS 18 · SC800V3200000 · 06K997071C_2977
€18
  1. 1 · E-mail
  2. 2 · Card
  3. 3 · File

Checking availability…

All sales are final — no refunds.

Card payment by Stripe · charged only when ready · Terms of sale · Privacy