1037390907 AQ92BEP420 Bosch EDC16C1 map pack – BMW 7 Series 3.0 D 218hp
SW
1037390907CALAQ92BEP420Engine Torque22Injection System16Rail13Turbo System10Limiters6Air Control2Deactivations2
This pack holds 71 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 7 Series 3.0 D 218hp · Bosch EDC16C1
Also written: 1 037 390 907
More packs: BMW 7 Series · Bosch EDC16C1
All 71 maps
The percentage beside a name: the share of the 92 Bosch EDC16C1 packs that name it too.
Engine Torque 22 maps
- Limiter of Maximum torque8 maps · 100%
- Torque during cranking f(RPM,ECT)100%
- Torque request during standard condition100%
- Maximum torque for fifth gear2 maps · 99%
- Maximum torque for first gear99%
- Maximum torque for forth gear99%
- Maximum torque for second gear99%
- Maximum torque for sixth gear2 maps · 99%
- Maximum torque for third gear99%
- Maximum torque for reverse gear97%
- Maximum engine torque correction f(ECT_T)60%
- Engine torque correction49%
- Torque request during take off condition29%
Injection System 16 maps
- Fuel quantity injected f(RPM,Trq)3 maps · 100%
- Smoke limitation - Lower Lambda value4 maps · 100%
- Injection timing - Main Injection Base Map 13 maps · 98%
- Injection time87%
- Injection timing - Main Injection Base Map 32 maps · 84%
- Fuel quantity limiter70%
- Injection timing - Main Injection Base Map 22 maps · 62%
Rail 13 maps
- Rail pressure2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_T)2 maps · 75%
- Rail pressure limiter8 maps · 60%
- Rail pressure limiter f(RPM,Fuel_Q)48%
Turbo System 10 maps
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure100%
- Limiter of Turbo pressure3 maps · 98%
- Variable Geometry Duty Cycle2 maps · 95%
- Variable geometry (VGT) or wastegate (WG) control3 maps · 10%
Limiters 6 maps
- Maximum speed of vehicle5 maps · 78%
- Idle engine speed f(ECT)68%
Air Control 2 maps
- Air quantity - Base map80%
- Gas quantity recirculation13%
Deactivations 2 maps
- EGR Valve2 maps · 53%
How this pack differs from other Bosch EDC16C1 packs
Named here, but by under half of the 92 Bosch EDC16C1 packs:
- Variable geometry (VGT) or wastegate (WG) control 10%
- Gas quantity recirculation 13%
- Torque request during take off condition 29%
- Rail pressure limiter f(RPM,Fuel_Q) 48%
- Engine torque correction 49%
71 maps against the Bosch EDC16C1 median
The 92 Bosch EDC16C1 packs name 39 to 97 maps, median 64; 74% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 22 | 20 |
| Injection System | 16 | 16 |
| Rail | 13 | 9.5 |
| Turbo System | 10 | 10 |
| Limiters | 6 | 2 |
| Air Control | 2 | 1 |
| Deactivations | 2 | 2 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.