8V0906259R_0002 Siemens SIMOS 18.10 map pack – Audi S3 2.0 310hp
CAL
8V0906259R_0002Spark Advance127Engine Torque127Air Control56Limiters39Turbo System36Injection System23Rail12Deactivations6
This pack holds 426 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S3 2.0 310hp · Siemens SIMOS 18.10
More packs: Audi S3 · Siemens SIMOS 18.10
All 426 maps
The percentage beside a name: the share of the 5 Siemens SIMOS 18.10 packs that name it too.
Spark Advance 127 maps
- Limiter of knocking sensor8 maps · 100%
- Minimum Spark Advance32 maps · 100%
- Optimal Spark Advance22 maps · 100%
- Spark Advance base map56 maps · 100%
- Spark advance correction f(Air_T)4 maps · 100%
- Spark Advance correction in function of high ECT and IAT100%
- Minimum Spark advance - Exhaust valve OFF2 maps · 60%
- Minimum Spark Advance - Exhaust valve ON2 maps · 60%
Engine Torque 127 maps
- Calculated engine torque100%
- Engine torque correction14 maps · 100%
- Limiter of Maximum torque9 maps · 100%
- Maximum engine torque correction f(ECT_T)10 maps · 100%
- Maximum engine torque correction f(IAT_T)15 maps · 100%
- Maximum torque limiter f(gear)31 maps · 100%
- Optimal engine torque27 maps · 100%
- Torque limiter for clutch protection8 maps · 100%
- Torque request during standard condition12 maps · 100%
Air Control 56 maps
- Airflow mass through throttle valve100%
- Cylinder head temperature4 maps · 100%
- Engine load limiter3 maps · 100%
- Exhaust gas temperature4 maps · 100%
- Manual Setpoint MAP100%
- Maximum allowable exhaust gas temperature for spark retard control100%
- Reference of maximum throttle valve angle100%
- Requested engine load27 maps · 100%
- Threshold of end limitation on throttle valve angle3 maps · 100%
- Throttle valve100%
- MAP sensor maximum voltage80%
- Maximum MAF sensor80%
- Maximum MAP sensor80%
- Minimum MAF sensor80%
- Max value of catalyst temperature to enable diagnosis2 maps · 60%
- Min value of catalyst temperature to enable diagnosis2 maps · 60%
- Maximum intake air temperature2 maps · 40%
Limiters 39 maps
- Maximum speed of vehicle12 maps · 100%
- RPM Limiter15 maps · 100%
- RPM limiter (higher threshold)8 maps · 100%
- Atmospheric Pressure RPM Threshold60%
- RPM limiter - Automatic Transmission2 maps · 40%
- RPM limiter - Manual Transmission40%
Turbo System 36 maps
- Boost pressure deviation for basic charge air pressure too low100%
- Limiter of Turbo pressure10 maps · 100%
- Linearization of impulsive turbo pressure2 maps · 100%
- Maximum turbocharger temperature100%
- Minimum pressure difference for basic charge air pressure too high100%
- Minimum pressure difference for basic charge air pressure too low100%
- Temperature difference to activate turbine overheating protection100%
- Threshold for turbocharger speed reduction100%
- Wastegate Duty Cycle6 maps · 100%
- Maximum turbocharger speed2 maps · 80%
- Surge limit from the turbocharger2 maps · 60%
- Upper limit for low pass filtered boost control deviation4 maps · 60%
- Limiter of Turbo pressure in Launch Control Mode2 maps · 40%
- Maximum allowed pressure difference at compressor40%
- Maximum pressure difference for basic charge air pressure too high40%
Injection System 23 maps
- Injection at full load2 maps · 100%
- Injection base map4 maps · 100%
- Limiter of Lambda A100%
- Limiter of Lambda B2 maps · 100%
- Requested Lambda4 maps · 100%
- Deleay time for sound tuning activation in Overrun condition60%
- Sound tuning duration time3 maps · 60%
- Sound tuning duration time during gear shift60%
- Sound tuning duration time during gear shift in Sport Mode60%
- Sound tuning duration time in Sport Mode3 maps · 60%
- Time reduction factor for sound tuning activation f(CAT temperature)60%
Rail 12 maps
- Rail pressure11 maps · 100%
- Rail pressure limiter60%
Deactivations 6 maps
- Deactivation turbocharger protection (1=ON, 0=OFF)2 maps · 100%
- Lambda Sensor (1=ON, 0=OFF)3 maps · 100%
- Sound tuning activation60%
How this pack differs from other Siemens SIMOS 18.10 packs
Named here, but by under half of the 5 Siemens SIMOS 18.10 packs:
- Limiter of Turbo pressure in Launch Control Mode 40%
- Maximum allowed pressure difference at compressor 40%
- Maximum intake air temperature 40%
- Maximum pressure difference for basic charge air pressure too high 40%
- RPM limiter - Automatic Transmission 40%
- RPM limiter - Manual Transmission 40%
Named by at least half of them, but not by this pack:
- Correction of impulsive turbo pressure f(IAT) 60%
- Limiter of impulsive turbo pressure 60%
- RPM limiter in Neutral 60%
426 maps against the Siemens SIMOS 18.10 median
The 5 Siemens SIMOS 18.10 packs name 357 to 426 maps, median 398; 60% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Spark Advance | 127 | 120 |
| Engine Torque | 127 | 127 |
| Air Control | 56 | 53 |
| Limiters | 39 | 34 |
| Turbo System | 36 | 35 |
| Injection System | 23 | 22 |
| Rail | 12 | 12 |
| Deactivations | 6 | 6 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.