0000063C060A00 00000736140352 Bosch EDC17CP09 map pack – BMW 5 Series 3.0 245hp
0000063C060A00CAL00000736140352This pack holds 60 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 5 Series 3.0 245hp · Bosch EDC17CP09
More packs: BMW 5 Series · Bosch EDC17CP09
All 60 maps
The percentage beside a name: the share of the 49 Bosch EDC17CP09 packs that name it too.
Injection System 20 maps
- Fuel quantity injected f(RPM,Trq)4 maps · 100%
- Injection timing - Main Injection Base Map 110 maps · 100%
- Smoke limitation - Lower Lambda value3 maps · 100%
- Injection time94%
- Injection timing - Main Injection Base Map 290%
- Injection timing - Main Injection Base Map 388%
Turbo System 17 maps
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure5 maps · 100%
- Variable geometry (VGT) or wastegate (WG) control7 maps · 53%
- Limiter of Turbo pressure4 maps · 47%
Rail 8 maps
- Rail pressure5 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 94%
- Rail pressure limiter f(RPM,Fuel_T)84%
Air Control 7 maps
- Percentage valve opening6 maps · 33%
- Gas quantity recirculation31%
Engine Torque 7 maps
- Limiter of Maximum torque2 maps · 100%
- Torque during cranking f(RPM,ECT)100%
- Torque request during standard condition100%
- Torque request during take off condition100%
- Torque limiter for vehicle speed2 maps · 96%
Limiters 1 map
- Maximum speed of vehicle100%
How this pack differs from other Bosch EDC17CP09 packs
Named here, but by under half of the 49 Bosch EDC17CP09 packs:
- Gas quantity recirculation 31%
- Percentage valve opening 33%
- Limiter of Turbo pressure 47%
Named by at least half of them, but not by this pack (14 of 16, the commonest first):
- Calculated engine torque 88%
- Maximum torque for fifth gear 71%
- Maximum torque for first gear 71%
- Maximum torque for forth gear 71%
- Maximum torque for second gear 71%
- Maximum torque for third gear 71%
- Maximum torque for sixth gear 69%
- Maximum torque for reverse gear 67%
- EGR Valve 55%
- Engine torque correction 53%
- Exhaust gas temperature 53%
- Idle engine speed f(ECT) 53%
- Maximum engine torque correction f(eng_T) 53%
- Maximum torque limiter f(fuel_T) 53%
60 maps against the Bosch EDC17CP09 median
The 49 Bosch EDC17CP09 packs name 21 to 144 maps, median 125; 6% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 20 | 30 |
| Turbo System | 17 | 29 |
| Rail | 8 | 12 |
| Air Control | 7 | 2 |
| Engine Torque | 7 | 29 |
| Limiters | 1 | 3 |
| Deactivations | 0 | 12 |
Same map list as 1 other SW version
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| Calibration 00000971140322 | BMW 7 Series 3.0 D 306hp | 21 |
Other SW versions on HW 0000063C060A00
4 SW versions sit on this HW in the archive, 20 files in all: BMW 7 Series (14), BMW 5 Series (4), BMW X Series (1). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 0000063D011406 | BMW 5 Series 3.0 245hp | none listed |
| 0000063D011407 | BMW 5 Series 3.0 245hp | none listed |
| 0000063D011408 | BMW 5 Series 3.0 286hp | none listed |
| 0000063D011403 | BMW 7 Series 3.0 299hp | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.