−10%10% off all files right now — originals €18, map packs from €54.
€18 / file−10%

3G0906259_0004 Siemens SIMOS 18.1 map pack – Skoda Superb 2.0 220hp

CAL3G0906259_0004
Engine Torque122Spark Advance117Air Control37Limiters33Turbo System27Rail13Injection System10Deactivations4

This pack holds 363 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.

Skoda Superb 2.0 220hp · Siemens SIMOS 18.1

More packs: Skoda Superb · Siemens SIMOS 18.1

Where do I find these numbers?

All 363 maps

The percentage beside a name: the share of the 48 Siemens SIMOS 18.1 packs that name it too.

Engine Torque 122 maps

  • Calculated engine torque100%
  • Limiter of Maximum torque46 maps · 100%
  • Optimal engine torque24 maps · 100%
  • Torque limiter for clutch protection8 maps · 100%
  • Torque request during standard condition23 maps · 96%
  • Engine torque correction5 maps · 75%
  • Maximum engine torque correction f(ECT_T)10 maps · 60%
  • Maximum engine torque correction f(IAT_T)5 maps · 58%

Spark Advance 117 maps

  • Optimal Spark Advance56 maps · 100%
  • Spark Advance base map19 maps · 100%
  • Minimum Spark Advance32 maps · 85%
  • Limiter of knocking sensor8 maps · 81%
  • Spark advance correction f(Air_T)62%
  • Spark Advance correction in function of high ECT and IAT46%

Air Control 37 maps

  • Reference of maximum throttle valve angle100%
  • Requested engine load24 maps · 100%
  • Throttle valve98%
  • Exhaust gas temperature3 maps · 96%
  • Engine load limiter2 maps · 92%
  • Threshold of end limitation on throttle valve angle81%
  • Airflow mass through throttle valve77%
  • Manual Setpoint MAP75%
  • MAP sensor maximum voltage75%
  • Maximum allowable exhaust gas temperature for spark retard control71%
  • Cylinder head temperature69%

Limiters 33 maps

  • Maximum speed of vehicle11 maps · 100%
  • RPM Limiter5 maps · 100%
  • RPM limiter (higher threshold)13 maps · 92%
  • RPM limiter (lower threshold)77%
  • RPM limiter in Neutral3 maps · 71%

Turbo System 27 maps

  • Limiter of Turbo pressure12 maps · 100%
  • Linearization of impulsive turbo pressure2 maps · 100%
  • Wastegate Duty Cycle4 maps · 100%
  • Limiter of impulsive turbo pressure2 maps · 96%
  • Correction of impulsive turbo pressure f(IAT)90%
  • Threshold for turbocharger speed reduction75%
  • Boost pressure deviation for basic charge air pressure too low71%
  • Minimum pressure difference for basic charge air pressure too low71%
  • Minimum pressure difference for basic charge air pressure too high69%
  • Turbo pressure2 maps · 58%

Rail 13 maps

  • Rail pressure13 maps · 100%

Injection System 10 maps

  • Injection at full load2 maps · 100%
  • Injection base map2 maps · 100%
  • Requested Lambda3 maps · 100%
  • Limiter of Lambda B79%
  • Limiter of Lambda A75%
  • Lambda for component protection50%

Deactivations 4 maps

  • Deactivation turbocharger protection (1=ON, 0=OFF)75%
  • Lambda Sensor (1=ON, 0=OFF)3 maps · 73%

How this pack differs from other Siemens SIMOS 18.1 packs

Named here, but by under half of the 48 Siemens SIMOS 18.1 packs:

  • Spark Advance correction in function of high ECT and IAT 46%

Named by at least half of them, but not by this pack:

  • Minimum MAF sensor 75%
  • Maximum MAF sensor 69%
  • Maximum turbocharger temperature 69%
  • Maximum MAP sensor 62%
  • Torque request during take off condition 62%
  • Maximum torque limiter f(ECT) in function of high IAT or low atmospheric pressure 58%
  • Maximum turbocharger speed 58%
  • Temperature difference to activate turbine overheating protection 54%

363 maps against the Siemens SIMOS 18.1 median

The 48 Siemens SIMOS 18.1 packs name 256 to 467 maps, median 366; 42% of them name fewer than this one.

CategoryThis packMedian pack
Engine Torque122119.5
Spark Advance117116
Air Control3747
Limiters3326.5
Turbo System2726
Rail1313
Injection System1010
Deactivations44

Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.

Original ECU file Siemens SIMOS 18.1 · 3G0906259_0004
€18
  1. 1 · E-mail
  2. 2 · Card
  3. 3 · File

Checking availability…

All sales are final — no refunds.

Card payment by Stripe · charged only when ready · Terms of sale · Privacy