Bosch EDC16C31 map pack – Mercedes C 220 2200 CDI 150hp
Engine Torque13Injection System12Turbo System7Rail7Air Control3Limiters3
This pack holds 45 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Mercedes C 220 2200 CDI 150hp · Bosch EDC16C31
More packs: Mercedes C · Bosch EDC16C31
All 45 maps
The percentage beside a name: the share of the 218 Bosch EDC16C31 packs that name it too.
Engine Torque 13 maps
- Torque during cranking f(RPM,ECT)97%
- Maximum torque for fifth gear78%
- Maximum torque for first gear78%
- Maximum torque for forth gear78%
- Maximum torque for second gear78%
- Maximum torque for sixth gear78%
- Maximum torque for third gear78%
- Maximum torque for reverse gear76%
- Limiter of Maximum torque58%
- Limiter of Maximum torque f(APS)45%
- Torque request during take off condition42%
- Torque limiter at gearbox input29%
- Maximum torque for seventh gear6%
Injection System 12 maps
- Injection timing - Main Injection Base Map 196%
- Fuel quantity limiter3 maps · 91%
- Fuel quantity injected f(RPM,Trq)2 maps · 87%
- Injection time64%
- Injection timing - Main Injection Base Map 261%
- Smoke limitation - Lower Lambda value42%
- Injection timing - Main Injection Base Map 338%
- Injection timing - Main Injection Base Map 429%
- Injection timing - Main Injection Base Map 524%
Turbo System 7 maps
- Turbo pressure95%
- Limiter of Turbo pressure3 maps · 55%
- Limiter of Turbo pressure f(IAT)21%
- Variable geometry (VGT) or wastegate (WG) control2 maps · 21%
Rail 7 maps
- Rail pressure2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 98%
- Rail pressure limiter f(RPM,Fuel_T)3 maps · 86%
Air Control 3 maps
- EGR control - Opening percentage2 maps · 64%
- Air quantity - Base map60%
Limiters 3 maps
- Idle engine speed f(ECT)2 maps · 62%
- Maximum speed of vehicle42%
How this pack differs from other Bosch EDC16C31 packs
Named here, but by under half of the 218 Bosch EDC16C31 packs:
- Maximum torque for seventh gear 6%
- Limiter of Turbo pressure f(IAT) 21%
- Variable geometry (VGT) or wastegate (WG) control 21%
- Injection timing - Main Injection Base Map 5 24%
- Torque limiter at gearbox input 29%
- Injection timing - Main Injection Base Map 4 29%
- Injection timing - Main Injection Base Map 3 38%
- Torque request during take off condition 42%
- Maximum speed of vehicle 42%
- Smoke limitation - Lower Lambda value 42%
- Limiter of Maximum torque f(APS) 45%
Named by at least half of them, but not by this pack:
- Limiter of Turbo pressure f(APS) 86%
45 maps against the Bosch EDC16C31 median
The 218 Bosch EDC16C31 packs name 15 to 152 maps, median 58; 28% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 13 | 12 |
| Injection System | 12 | 20 |
| Turbo System | 7 | 9 |
| Rail | 7 | 7 |
| Air Control | 3 | 4 |
| Limiters | 3 | 3 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.