03F906070KC_6270 Siemens SIMOS10.22 map pack – Volkswagen Polo 1.2 105hp
CAL
03F906070KC_6270Engine Torque24Turbo System14Spark Advance13Limiters9Injection System6Air Control4Rail4
This pack holds 74 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Volkswagen Polo 1.2 105hp · Siemens SIMOS10.22
More packs: Volkswagen Polo · Siemens SIMOS10.22
All 74 maps
The percentage beside a name: the share of the 6 Siemens SIMOS10.22 packs that name it too.
Engine Torque 24 maps
- Calculated engine torque100%
- Limiter of Maximum torque9 maps · 100%
- Optimal engine torque2 maps · 100%
- Torque limiter for clutch protection2 maps · 67%
- Maximum torque during shift gear50%
- Torque request during take off condition50%
- Torque request during take off condition - Fifth Gear50%
- Torque request during take off condition - First Gear50%
- Torque request during take off condition - Forth Gear50%
- Torque request during take off condition - Reverse Gear50%
- Torque request during take off condition - Second Gear50%
- Torque request during take off condition - Sixth Gear50%
- Torque request during take off condition - Third Gear50%
- Maximum torque for seventh gear17%
Turbo System 14 maps
- Limiter of Turbo pressure3 maps · 100%
- Limiter of Turbo pressure f(APS)83%
- Wastegate Duty Cycle2 maps · 83%
- Maximum turbocharger speed3 maps · 67%
- Turbine efficiency67%
- Turbo pressure4 maps · 67%
Spark Advance 13 maps
- Spark Advance base map2 maps · 100%
- Spark advance during cranking83%
- Limiter of knocking sensor8 maps · 67%
- Optimal Spark Advance2 maps · 67%
Limiters 9 maps
- RPM Limiter7 maps · 100%
- Idle engine speed f(ECT)83%
- Maximum speed of vehicle67%
Injection System 6 maps
- Injection base map2 maps · 100%
- Requested Lambda2 maps · 83%
- Injection correction67%
- Injection enrichment33%
Air Control 4 maps
- Requested engine load100%
- Exhaust gas temperature83%
- Engine load limiter2 maps · 67%
Rail 4 maps
- Rail pressure3 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)17%
How this pack differs from other Siemens SIMOS10.22 packs
Named here, but by under half of the 6 Siemens SIMOS10.22 packs:
- Maximum torque for seventh gear 17%
- Rail pressure limiter f(RPM,Fuel_Q) 17%
- Injection enrichment 33%
Named by at least half of them, but not by this pack:
- Injection at full load 67%
- Torque request during standard condition 50%
74 maps against the Siemens SIMOS10.22 median
The 6 Siemens SIMOS10.22 packs name 21 to 74 maps, median 71.5; 83% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 24 | 23.5 |
| Turbo System | 14 | 14 |
| Spark Advance | 13 | 13 |
| Limiters | 9 | 9 |
| Injection System | 6 | 6 |
| Air Control | 4 | 4 |
| Rail | 4 | 2 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.