1037554601 03N906026E_1296 Bosch EDC17CP74 map pack – Volkswagen Passat 8 2.0 TDI 239hp
1037554601CAL03N906026E_1296This pack holds 200 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Volkswagen Passat 8 2.0 TDI 239hp · Bosch EDC17CP74
Also written: 1 037 554 601
More packs: Volkswagen Passat 8 · Bosch EDC17CP74
All 200 maps
The percentage beside a name: the share of the 8 Bosch EDC17CP74 packs that name it too.
Turbo System 76 maps
- Compressor efficiency4 maps · 100%
- Correction of turbo pressure f(IAT)13 maps · 100%
- Limiter of Turbo pressure7 maps · 100%
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure21 maps · 100%
- Variable geometry (VGT) or wastegate (WG) control30 maps · 100%
Injection System 75 maps
- Fuel quantity injected f(RPM,Trq)5 maps · 100%
- Injection correction11 maps · 100%
- Injection timing - Main Injection Base Map 136 maps · 100%
- Smoke limitation - Higher Lambda value14 maps · 100%
- Smoke limitation - Lower Lambda value100%
- Injection timing - Main Injection Base Map 32 maps · 88%
- Injection time62%
- Injection timing - Main Injection Base Map 55 maps · 62%
Rail 22 maps
- Rail pressure10 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)8 maps · 100%
- Rail pressure limiter f(RPM,Fuel_T)4 maps · 75%
Engine Torque 14 maps
- Limiter of Maximum torque6 maps · 100%
- Limiter of Maximum torque f(APS)100%
- Torque request during standard condition3 maps · 100%
- Torque request during take off condition - Reverse Gear50%
- Torque request during take off condition - Forth Gear25%
- Torque request during take off condition - Second Gear25%
- Torque request during take off condition - Third Gear25%
Limiters 8 maps
- Maximum speed of vehicle8 maps · 100%
Air Control 5 maps
- Exhaust gas temperature5 maps · 100%
How this pack differs from other Bosch EDC17CP74 packs
Named here, but by under half of the 8 Bosch EDC17CP74 packs:
- Torque request during take off condition - Forth Gear 25%
- Torque request during take off condition - Second Gear 25%
- Torque request during take off condition - Third Gear 25%
Named by at least half of them, but not by this pack:
- Torque during cranking f(RPM,ECT) 88%
- Correction of turbo pressure 75%
- Idle engine speed f(ECT) 75%
- Injection timing - Main Injection Base Map 2 75%
- Rail pressure limiter 75%
- Torque request during take off condition 75%
- Fuel quantity limiter 50%
- Injection timing - Main Injection Base Map 4 50%
- Variable Geometry Duty Cycle 50%
200 maps against the Bosch EDC17CP74 median
The 8 Bosch EDC17CP74 packs name 184 to 228 maps, median 206.5; 12% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 76 | 81 |
| Injection System | 75 | 75 |
| Rail | 22 | 20 |
| Engine Torque | 14 | 18.5 |
| Limiters | 8 | 11 |
| Air Control | 5 | 5 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.