0261208500 1037369011 Bosch ME7.5 map pack – Audi A4 1.8 20V 163hp
HW
0261208500SW1037369011CAL8E0909518AS_0003Turbo System11Air Control8Engine Torque7Limiters6Injection System6Spark Advance5Deactivations5
This pack holds 48 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A4 1.8 20V 163hp · Bosch ME7.5
Also written: 0 261 208 500 · 1 037 369 011
More packs: Audi A4 · Bosch ME7.5
All 48 maps
The percentage beside a name: the share of the 137 Bosch ME7.5 packs that name it too.
Turbo System 11 maps
- Slow incremental factor of turbo pressure84%
- Fast reduction factor of turbo pressure81%
- Correction of slow incremental factor of turbo pressure72%
- Wastegate Duty Cycle62%
- Linearization of impulsive turbo pressure59%
- Limiter of steady turbo pressure53%
- Limiter of impulsive turbo pressure50%
- Correction of turbo pressure f(IAT)39%
- Limiter of Turbo pressure f(IAT)21%
- Correction of steady turbo pressure f(IAT)5%
- Correction of impulsive turbo pressure f(IAT)4%
Air Control 8 maps
- Requested engine load97%
- Throttle valve - operating angle97%
- Airflow mass through throttle valve93%
- Reference of maximum throttle valve angle86%
- Threshold of end limitation on throttle valve angle77%
- Throttle valve f(Accelerator pedal)72%
- Exhaust gas temperature2 maps · 60%
Engine Torque 7 maps
- Optimal engine torque98%
- Torque request during standard condition2 maps · 20%
- Torque request - Low speed2 maps · 13%
- Torque request - High speed7%
- Maximum torque for reverse gear3%
Limiters 6 maps
- RPM Limiter5 maps · 96%
- RPM limiter (higher threshold)74%
Injection System 6 maps
- Requested Lambda96%
- Phase of injection2 maps · 74%
- Lambda for component protection73%
- Injection at partial load66%
- Injection correction61%
Spark Advance 5 maps
- Spark Advance base map2 maps · 98%
- Optimal Spark Advance2 maps · 66%
- Spark advance during cranking62%
Deactivations 5 maps
- Lambda Sensor (1=ON, 0=OFF)4 maps · 80%
- Catalytic converter Diagnosis (1=ON, 0=OFF)35%
How this pack differs from other Bosch ME7.5 packs
Named here, but by under half of the 137 Bosch ME7.5 packs:
- Maximum torque for reverse gear 3%
- Correction of impulsive turbo pressure f(IAT) 4%
- Correction of steady turbo pressure f(IAT) 5%
- Torque request - High speed 7%
- Torque request - Low speed 13%
- Torque request during standard condition 20%
- Limiter of Turbo pressure f(IAT) 21%
- Catalytic converter Diagnosis (1=ON, 0=OFF) 35%
- Correction of turbo pressure f(IAT) 39%
Named by at least half of them, but not by this pack:
- Torque request during take off condition 84%
- Limiter of Turbo pressure 80%
- Maximum speed of vehicle 68%
48 maps against the Bosch ME7.5 median
The 137 Bosch ME7.5 packs name 12 to 108 maps, median 49; 48% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 11 | 11 |
| Air Control | 8 | 8 |
| Engine Torque | 7 | 4 |
| Limiters | 6 | 8 |
| Injection System | 6 | 6 |
| Spark Advance | 5 | 5 |
| Deactivations | 5 | 4 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.