1037500634 Bosch EDC17CP19 map pack – Renault Scenic III 2.0 150hp
SW
1037500634Engine Torque27Injection System26Rail22Turbo System9Air Control1
This pack holds 85 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Renault Scenic III 2.0 150hp · Bosch EDC17CP19
Also written: 1 037 500 634
More packs: Renault Scenic III · Bosch EDC17CP19
All 85 maps
The percentage beside a name: the share of the 5 Bosch EDC17CP19 packs that name it too.
Engine Torque 27 maps
- Limiter of Maximum torque14 maps · 100%
- Limiter of Maximum torque f(APS)3 maps · 100%
- Optimal engine torque2 maps · 100%
- Torque during cranking f(RPM,ECT)100%
- Engine torque correction4 maps · 40%
- Maximum power limiter40%
- Torque request during standard condition40%
- Maximum torque limiter f(fuel_T)20%
Injection System 26 maps
- Fuel quantity injected f(RPM,Trq)2 maps · 100%
- Injection time2 maps · 40%
- Injection timing - Main Injection Base Map 17 maps · 40%
- Injection timing - Main Injection Base Map 23 maps · 40%
- Smoke limitation - Lower Lambda value5 maps · 40%
- Injection correction20%
- Injection timing - Main Injection Base Map 32 maps · 20%
- Injection timing - Main Injection Base Map 42 maps · 20%
- Injection timing limiter - Main injection base map2 maps · 20%
Rail 22 maps
- Rail pressure8 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)12 maps · 100%
- Rail pressure limiter f(RPM,Fuel_T)2 maps · 100%
Turbo System 9 maps
- Limiter of Turbo pressure4 maps · 100%
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure2 maps · 100%
- Variable Geometry Duty Cycle2 maps · 100%
Air Control 1 map
- Exhaust gas temperature40%
How this pack differs from other Bosch EDC17CP19 packs
Named here, but by under half of the 5 Bosch EDC17CP19 packs:
- Injection correction 20%
- Injection timing - Main Injection Base Map 3 20%
- Injection timing - Main Injection Base Map 4 20%
- Injection timing limiter - Main injection base map 20%
- Maximum torque limiter f(fuel_T) 20%
- Engine torque correction 40%
- Exhaust gas temperature 40%
- Injection time 40%
- Injection timing - Main Injection Base Map 1 40%
- Injection timing - Main Injection Base Map 2 40%
- Maximum power limiter 40%
- Smoke limitation - Lower Lambda value 40%
- Torque request during standard condition 40%
Named by at least half of them, but not by this pack:
- Phase of injection 60%
85 maps against the Bosch EDC17CP19 median
The 5 Bosch EDC17CP19 packs name 41 to 85 maps, median 42; 80% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 27 | 16 |
| Injection System | 26 | 5 |
| Rail | 22 | 12 |
| Turbo System | 9 | 9 |
| Air Control | 1 | 0 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.