B4YMBE63FRB8100 10123538AA Siemens SID206 map pack – Ford S-MAX 1.8 125hp
HW
B4YMBE63FRB8100SW10123538AACAL7G91-12K532-UAInjection System44Engine Torque15Turbo System14Rail12Air Control5
This pack holds 90 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Ford S-MAX 1.8 125hp · Siemens SID206
Also written: 7G91 12K532 UA · 7G9112K532UA
More packs: Ford S-MAX · Siemens SID206
All 90 maps
The percentage beside a name: the share of the 45 Siemens SID206 packs that name it too.
Injection System 44 maps
- Injection timing - Main Injection Base Map 120 maps · 100%
- Injection timing - Main Injection Base Map 22 maps · 98%
- Injection time2 maps · 91%
- Injection base map20 maps · 22%
Engine Torque 15 maps
- Limiter of Maximum torque4 maps · 100%
- Torque during cranking f(RPM,ECT)2 maps · 100%
- Limiter of Maximum torque f(APS)91%
- Torque request during take off condition6 maps · 16%
- Optimal engine torque2 maps · 11%
Turbo System 14 maps
- Turbo pressure5 maps · 100%
- Variable geometry (VGT) or wastegate (WG) control2 maps · 100%
- Limiter of Turbo pressure2 maps · 11%
- Variable Geometry Duty Cycle5 maps · 11%
Rail 12 maps
- Rail pressure10 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 100%
Air Control 5 maps
- Air quantity - Base map5 maps · 93%
How this pack differs from other Siemens SID206 packs
Named here, but by under half of the 45 Siemens SID206 packs:
- Limiter of Turbo pressure 11%
- Optimal engine torque 11%
- Variable Geometry Duty Cycle 11%
- Torque request during take off condition 16%
- Injection base map 22%
Named by at least half of them, but not by this pack:
- Limiter of Turbo pressure f(APS) 89%
- Limiter of Turbo pressure f(IAT) 89%
- Fuel quantity limiter 84%
- Fuel quantity injected f(RPM,Trq) 80%
- Torque request during take off condition - First Gear 73%
- Torque request during take off condition - Forth Gear 71%
- Torque request during take off condition - Second Gear 71%
- Torque request during take off condition - Third Gear 71%
- Torque request during take off condition - Fifth Gear 69%
- Torque request during take off condition - Sixth Gear 56%
90 maps against the Siemens SID206 median
The 45 Siemens SID206 packs name 83 to 93 maps, median 92; 29% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 44 | 47 |
| Engine Torque | 15 | 13 |
| Turbo System | 14 | 14 |
| Rail | 12 | 12 |
| Air Control | 5 | 5 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.