NCD13B00 Delphi DCM3.2 map pack – Ssangyong Rexton 2.7 163hp
SW
NCD13B00Engine Torque10Injection System5Rail4Turbo System3Air Control1
This pack holds 23 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Ssangyong Rexton 2.7 163hp · Delphi DCM3.2
More packs: Ssangyong Rexton · Delphi DCM3.2
All 23 maps
The percentage beside a name: the share of the 65 Delphi DCM3.2 packs that name it too.
Engine Torque 10 maps
- Limiter of Maximum torque3 maps · 98%
- Optimal engine torque4 maps · 97%
- Torque during cranking f(RPM,ECT)91%
- Torque limiter at gearbox input2 maps · 89%
Injection System 5 maps
- Fuel quantity limiter95%
- Fuel quantity injected f(RPM,Trq)3 maps · 89%
- Phase of injection46%
Rail 4 maps
- Rail pressure2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 97%
Turbo System 3 maps
- Turbo pressure2 maps · 100%
- Variable Geometry Duty Cycle97%
Air Control 1 map
- Air quantity - Base map98%
How this pack differs from other Delphi DCM3.2 packs
Named here, but by under half of the 65 Delphi DCM3.2 packs:
- Phase of injection 46%
Named by at least half of them, but not by this pack:
- Limiter of Turbo pressure 86%
- Torque request during take off condition 80%
- Rail pressure limiter f(RPM,Fuel_T) 77%
- Limiter of Turbo pressure f(APS) 69%
- Injection time 55%
23 maps against the Delphi DCM3.2 median
The 65 Delphi DCM3.2 packs name 17 to 50 maps, median 33; 12% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 10 | 13 |
| Injection System | 5 | 5 |
| Rail | 4 | 5 |
| Turbo System | 3 | 9 |
| Air Control | 1 | 1 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.