Bosch ME7.5 map pack – Audi A4 1.8 163hp
Turbo System12Engine Torque10Limiters6Injection System5Spark Advance5Air Control4
This pack holds 42 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A4 1.8 163hp · Bosch ME7.5
More packs: Audi A4 · Bosch ME7.5
All 42 maps
The percentage beside a name: the share of the 137 Bosch ME7.5 packs that name it too.
Turbo System 12 maps
- Slow incremental factor of turbo pressure84%
- Fast reduction factor of turbo pressure81%
- Limiter of Turbo pressure2 maps · 80%
- Correction of slow incremental factor of turbo pressure72%
- Linearization of impulsive turbo pressure59%
- Limiter of steady turbo pressure53%
- Limiter of impulsive turbo pressure50%
- Turbo pressure41%
- Variable geometry (VGT) or wastegate (WG) control3 maps · 31%
Engine Torque 10 maps
- Optimal engine torque98%
- Calculated engine torque3 maps · 15%
- Torque request during take off condition - Fifth Gear2%
- Torque request during take off condition - First Gear2%
- Torque request during take off condition - Forth Gear2%
- Torque request during take off condition - Second Gear2%
- Torque request during take off condition - Sixth Gear2%
- Torque request during take off condition - Third Gear2%
Limiters 6 maps
- RPM Limiter5 maps · 96%
- RPM limiter (higher threshold)74%
Injection System 5 maps
- Requested Lambda96%
- Lambda for component protection73%
- Injection base map37%
- Injection correction f(ECT)2 maps · 18%
Spark Advance 5 maps
- Spark Advance base map2 maps · 98%
- Spark advance during cranking62%
- Optimal Spark Advance 12 maps · 6%
Air Control 4 maps
- Requested engine load97%
- Throttle valve - operating angle97%
- Airflow mass through throttle valve93%
- Reference of maximum throttle valve angle86%
How this pack differs from other Bosch ME7.5 packs
Named here, but by under half of the 137 Bosch ME7.5 packs:
- Torque request during take off condition - Fifth Gear 2%
- Torque request during take off condition - First Gear 2%
- Torque request during take off condition - Forth Gear 2%
- Torque request during take off condition - Second Gear 2%
- Torque request during take off condition - Sixth Gear 2%
- Torque request during take off condition - Third Gear 2%
- Optimal Spark Advance 1 6%
- Calculated engine torque 15%
- Injection correction f(ECT) 18%
- Variable geometry (VGT) or wastegate (WG) control 31%
- Injection base map 37%
- Turbo pressure 41%
Named by at least half of them, but not by this pack:
- Torque request during take off condition 84%
- Lambda Sensor (1=ON, 0=OFF) 80%
- Threshold of end limitation on throttle valve angle 77%
- Phase of injection 74%
- Throttle valve f(Accelerator pedal) 72%
- Maximum speed of vehicle 68%
- Injection at partial load 66%
- Optimal Spark Advance 66%
- Wastegate Duty Cycle 62%
- Injection correction 61%
- Exhaust gas temperature 60%
42 maps against the Bosch ME7.5 median
The 137 Bosch ME7.5 packs name 12 to 108 maps, median 49; 31% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 12 | 11 |
| Engine Torque | 10 | 4 |
| Limiters | 6 | 8 |
| Injection System | 5 | 6 |
| Spark Advance | 5 | 5 |
| Air Control | 4 | 8 |
| Deactivations | 0 | 4 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.