Siemens SID803A map pack – Jaguar S-TYPE 2.7 D 207hp
Injection System32Turbo System20Rail14Engine Torque12
This pack holds 78 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Jaguar S-TYPE 2.7 D 207hp · Siemens SID803A
More packs: Jaguar S-TYPE · Siemens SID803A
All 78 maps
The percentage beside a name: the share of the 55 Siemens SID803A packs that name it too.
Injection System 32 maps
- Fuel quantity injected f(RPM,Trq)20 maps · 98%
- Injection time2 maps · 44%
- Injection base map2 maps · 22%
- Injection timing - Main Injection Base Map 28 maps · 11%
Turbo System 20 maps
- Turbo pressure9 maps · 100%
- Limiter of Turbo pressure95%
- Limiter of Turbo pressure f(APS)78%
- Variable Geometry Duty Cycle3 maps · 76%
- Variable geometry (VGT) or wastegate (WG) control6 maps · 29%
Rail 14 maps
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 96%
- Rail pressure12 maps · 95%
Engine Torque 12 maps
- Limiter of Maximum torque6 maps · 96%
- Torque during cranking f(RPM,ECT)3 maps · 76%
- Torque request during take off condition2 maps · 24%
- Maximum torque limiter f(fuel_T)9%
How this pack differs from other Siemens SID803A packs
Named here, but by under half of the 55 Siemens SID803A packs:
- Maximum torque limiter f(fuel_T) 9%
- Injection timing - Main Injection Base Map 2 11%
- Injection base map 22%
- Torque request during take off condition 24%
- Variable geometry (VGT) or wastegate (WG) control 29%
- Injection time 44%
Named by at least half of them, but not by this pack:
- Air quantity - Base map 85%
- Torque request during take off condition - Fifth Gear 73%
- Torque request during take off condition - First Gear 73%
- Torque request during take off condition - Forth Gear 73%
- Torque request during take off condition - Second Gear 73%
- Torque request during take off condition - Third Gear 73%
- Optimal engine torque 69%
- Fuel quantity limiter 67%
- Torque request during take off condition - Sixth Gear 62%
- Rail pressure limiter f(RPM,Fuel_T) 60%
- Limiter of Turbo pressure f(IAT) 56%
- Phase of injection 56%
- Maximum engine torque for overheated engine 55%
- Smoke limitation - Higher Lambda value 55%
78 maps against the Siemens SID803A median
The 55 Siemens SID803A packs name 32 to 97 maps, median 37; 84% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 32 | 6 |
| Turbo System | 20 | 10 |
| Rail | 14 | 5 |
| Engine Torque | 12 | 11 |
| Air Control | 0 | 5 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.