00000C9D061100 00000CAA011711 Bosch EDC17C56 map pack – BMW 5 Series 3.0 258hp
00000C9D061100SW00000CAA011711CAL00000C9D061100_00000CAA011711_00000EA817111FUPG00000EA817111FThis pack holds 100 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 5 Series 3.0 258hp · Bosch EDC17C56
More packs: BMW 5 Series · Bosch EDC17C56
All 100 maps
The percentage beside a name: the share of the 54 Bosch EDC17C56 packs that name it too.
Injection System 32 maps
- Fuel quantity injected f(RPM,Trq)8 maps · 100%
- Injection timing - Main Injection Base Map 14 maps · 100%
- Smoke limitation - Lower Lambda value15 maps · 98%
- Injection time87%
- Injection timing - Main Injection Base Map 23 maps · 67%
- Injection timing - Main Injection Base Map 341%
Engine Torque 27 maps
- Limiter of Maximum torque9 maps · 100%
- Maximum torque for fifth gear100%
- Torque during cranking f(RPM,ECT)2 maps · 100%
- Torque limiter for vehicle speed4 maps · 100%
- Maximum torque for sixth gear98%
- Maximum torque for seventh gear3 maps · 93%
- Torque request during take off condition93%
- Maximum torque for first gear87%
- Maximum torque for forth gear87%
- Maximum torque for second gear87%
- Maximum torque for third gear87%
- Torque request during standard condition87%
- Maximum torque for reverse gear72%
Turbo System 22 maps
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure9 maps · 100%
- Variable geometry (VGT) or wastegate (WG) control12 maps · 2%
Air Control 11 maps
- Gas quantity recirculation11 maps · 2%
Rail 7 maps
- Rail pressure5 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)100%
- Rail pressure limiter f(RPM,Fuel_T)100%
Limiters 1 map
- Maximum speed of vehicle100%
How this pack differs from other Bosch EDC17C56 packs
Named here, but by under half of the 54 Bosch EDC17C56 packs:
- Gas quantity recirculation 2%
- Variable geometry (VGT) or wastegate (WG) control 2%
- Injection timing - Main Injection Base Map 3 41%
Named by at least half of them, but not by this pack:
- Idle engine speed f(ECT) 98%
- Variable Geometry Duty Cycle 98%
- Limiter of Maximum torque f(APS) 96%
- Calculated engine torque 87%
- Exhaust gas temperature 81%
- Fuel quantity limiter 80%
- Maximum torque limiter f(fuel_T) 76%
- Torque limiter at gearbox input 76%
- Engine torque correction 74%
- Maximum engine torque correction f(eng_T) 74%
- EGR Valve 63%
100 maps against the Bosch EDC17C56 median
The 54 Bosch EDC17C56 packs name 79 to 222 maps, median 200; 11% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 32 | 32 |
| Engine Torque | 27 | 42 |
| Turbo System | 22 | 29.5 |
| Air Control | 11 | 2 |
| Rail | 7 | 81 |
| Limiters | 1 | 8 |
| Deactivations | 0 | 10 |
Other SW versions on HW 00000C9D061100
8 SW versions sit on this HW in the archive, 120 files in all: BMW 5 Series (56), BMW 1 Series (34), BMW 3 Series (25). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 00000CAA01150B | BMW 5 Series 3.0 258hp N57D30A | none listed |
| 00000CAA01150D | BMW 5 Series 3.0 258hp N57D30A | 199 maps |
| 00000CAA011510 | BMW 5 Series 3.0 258hp | none listed |
| 00000CAA011512 | BMW 5 Series 3.0 258hp N57D30A | none listed |
| 00000CAA011523 | BMW 5 Series 3.0 258hp N57D30A | none listed |
| 00000CAA01170B | BMW 5 Series 3.0 258hp N57D30B | none listed |
| 00000CAA011710 | BMW 3 Series 3.0 258hp N57D30O1 | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.