8V0906259_0006 Siemens SIMOS12.1 map pack – Audi S3 2.0 301hp
CAL
8V0906259_0006Spark Advance111Engine Torque73Air Control31Limiters24Turbo System22Rail8Injection System7Deactivations1
This pack holds 277 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S3 2.0 301hp · Siemens SIMOS12.1
More packs: Audi S3 · Siemens SIMOS12.1
All 277 maps
The percentage beside a name: the share of the 14 Siemens SIMOS12.1 packs that name it too.
Spark Advance 111 maps
- Optimal Spark Advance37 maps · 100%
- Spark Advance base map38 maps · 100%
- Minimum Spark Advance32 maps · 50%
- Limiter of knocking sensor4 maps · 43%
Engine Torque 73 maps
- Limiter of Maximum torque41 maps · 100%
- Optimal engine torque17 maps · 100%
- Torque request during standard condition9 maps · 100%
- Calculated engine torque86%
- Torque request during take off condition - Automatic Transmission2 maps · 86%
- Torque limiter for clutch protection2 maps · 71%
- Torque request during take off condition64%
Air Control 31 maps
- Reference of maximum throttle valve angle100%
- Requested engine load16 maps · 100%
- Throttle valve100%
- Engine load limiter2 maps · 93%
- Exhaust gas temperature5 maps · 93%
- Cylinder head temperature5 maps · 50%
- Maximum allowable exhaust gas temperature for spark retard control50%
Limiters 24 maps
- Maximum speed of vehicle8 maps · 100%
- RPM Limiter5 maps · 100%
- RPM limiter (higher threshold)8 maps · 64%
- RPM limiter in Neutral3 maps · 64%
Turbo System 22 maps
- Turbo pressure4 maps · 100%
- Wastegate Duty Cycle4 maps · 100%
- Limiter of Turbo pressure10 maps · 93%
- Limiter of impulsive turbo pressure57%
- Maximum turbocharger temperature50%
- Threshold for turbocharger speed reduction50%
- Correction of impulsive turbo pressure f(IAT)36%
Rail 8 maps
- Rail pressure8 maps · 93%
Injection System 7 maps
- Injection at full load100%
- Injection base map2 maps · 100%
- Requested Lambda3 maps · 100%
- Lambda for component protection93%
Deactivations 1 map
- Catalytic converter Diagnosis (1=ON, 0=OFF)79%
How this pack differs from other Siemens SIMOS12.1 packs
Named here, but by under half of the 14 Siemens SIMOS12.1 packs:
- Correction of impulsive turbo pressure f(IAT) 36%
- Limiter of knocking sensor 43%
277 maps against the Siemens SIMOS12.1 median
The 14 Siemens SIMOS12.1 packs name 80 to 312 maps, median 209; 86% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Spark Advance | 111 | 75 |
| Engine Torque | 73 | 66 |
| Air Control | 31 | 21 |
| Limiters | 24 | 20.5 |
| Turbo System | 22 | 17 |
| Rail | 8 | 8 |
| Injection System | 7 | 7 |
| Deactivations | 1 | 1 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.