E060054 Siemens MSD80 map pack – BMW 3 Series 3.0 306hp
CAL
E060054Engine Torque23Variable Valve Timing (VVT)22Spark Advance18Air Control16Turbo System14Limiters12Injection System6Rail1
This pack holds 112 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 3 Series 3.0 306hp · Siemens MSD80
More packs: BMW 3 Series · Siemens MSD80
All 112 maps
The percentage beside a name: the share of the 15 Siemens MSD80 packs that name it too.
Engine Torque 23 maps
- Limiter of Maximum torque3 maps · 100%
- Optimal engine torque3 maps · 100%
- Torque request during take off condition5 maps · 53%
- Torque request during standard condition47%
- Engine torque correction40%
- Maximum engine torque correction f(ECT_T)40%
- Torque limiter for clutch protection5 maps · 40%
- Torque monitoring4 maps · 40%
Variable Valve Timing (VVT) 22 maps
- Exhaust - Catalyst protection4 maps · 87%
- Exhaust - High speed2 maps · 87%
- Exhaust - Low speed2 maps · 87%
- Intake - High speed2 maps · 87%
- Intake - Low speed2 maps · 87%
- Exhaust3 maps · 47%
- Intake - Catalyst protection4 maps · 47%
- Intake3 maps · 40%
Spark Advance 18 maps
- Optimal Spark Advance4 maps · 100%
- Spark Advance at full load2 maps · 100%
- Spark Advance base map5 maps · 100%
- Limiter of knocking sensor6 maps · 40%
- Spark advance correction f(Air_T)27%
Air Control 16 maps
- Airflow mass through throttle valve3 maps · 100%
- Requested engine load4 maps · 100%
- Throttle valve - operating angle100%
- Reference of maximum throttle valve angle60%
- Engine load limiter6 maps · 40%
- Throttle valve f(Accelerator pedal)27%
Turbo System 14 maps
- Limiter of Turbo pressure7 maps · 67%
- Wastegate Duty Cycle4 maps · 67%
- Limiter of Turbo pressure f(IAT)40%
- Correction of turbo pressure2 maps · 13%
Limiters 12 maps
- RPM Limiter6 maps · 100%
- Maximum speed of vehicle6 maps · 87%
Injection System 6 maps
- Injection base map3 maps · 100%
- Lambda for component protection73%
- Injection at full load47%
- Requested Lambda47%
Rail 1 map
- Rail pressure53%
How this pack differs from other Siemens MSD80 packs
Named here, but by under half of the 15 Siemens MSD80 packs (14 of 16, the rarest first):
- Correction of turbo pressure 13%
- Spark advance correction f(Air_T) 27%
- Throttle valve f(Accelerator pedal) 27%
- Engine load limiter 40%
- Engine torque correction 40%
- Intake 40%
- Limiter of Turbo pressure f(IAT) 40%
- Limiter of knocking sensor 40%
- Maximum engine torque correction f(ECT_T) 40%
- Torque limiter for clutch protection 40%
- Torque monitoring 40%
- Exhaust 47%
- Injection at full load 47%
- Intake - Catalyst protection 47%
Named by at least half of them, but not by this pack:
- Catalytic converter Diagnosis (1=ON, 0=OFF) 60%
112 maps against the Siemens MSD80 median
The 15 Siemens MSD80 packs name 35 to 112 maps, median 53; 87% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 23 | 6 |
| Variable Valve Timing (VVT) | 22 | 13 |
| Spark Advance | 18 | 11 |
| Air Control | 16 | 7 |
| Turbo System | 14 | 5 |
| Limiters | 12 | 7 |
| Injection System | 6 | 5 |
| Rail | 1 | 1 |
| Deactivations | 0 | 2 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.