Bosch ME9.0C map pack – Ford Focus 2.5 225hp
Spark Advance21Engine Torque20Air Control14Turbo System12Other9Variable Valve Timing (VVT)9Injection System6Limiters6
This pack holds 97 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Ford Focus 2.5 225hp · Bosch ME9.0C
More packs: Ford Focus · Bosch ME9.0C
All 97 maps
The percentage beside a name: the share of the 10 Bosch ME9.0C packs that name it too.
Spark Advance 21 maps
- Spark Advance base map4 maps · 100%
- Spark advance during cranking100%
- Optimal Spark Advance8 maps · 70%
- Limiter of knocking sensor5 maps · 40%
- Minimum Spark Advance3 maps · 20%
Engine Torque 20 maps
- Optimal engine torque100%
- Limiter of Maximum torque70%
- Torque request during take off condition50%
- Calculated engine torque40%
- Torque monitoring13 maps · 40%
- Engine torque correction20%
- Torque request - Low speed20%
- Torque request during take off condition - Reverse Gear20%
Air Control 14 maps
- Airflow mass through throttle valve2 maps · 100%
- Requested engine load100%
- Threshold of end limitation on throttle valve angle100%
- Throttle valve - operating angle100%
- Throttle valve f(Accelerator pedal)50%
- Engine load limiter4 maps · 40%
- Reference of maximum throttle valve angle30%
- Exhaust gas temperature2 maps · 20%
- MAF sensor slope20%
Turbo System 12 maps
- Limiter of Turbo pressure2 maps · 100%
- Turbo pressure6 maps · 100%
- Correction of turbo pressure f(IAT)40%
- Correction of steady turbo pressure f(IAT)20%
- Wastegate Duty Cycle2 maps · 20%
Other 9 maps
- Catalytic converter Diagnosis (1=ON2 maps · 10%
- Lambda Sensor (1=ON7 maps · 10%
Variable Valve Timing (VVT) 9 maps
- Exhaust4 maps · 50%
- Intake5 maps · 50%
Injection System 6 maps
- Lambda for component protection100%
- Requested Lambda100%
- Injection correction2 maps · 40%
- Injection enrichment40%
- Injection at full load20%
Limiters 6 maps
- RPM Limiter4 maps · 100%
- Maximum speed of vehicle50%
- RPM limiter (higher threshold)50%
How this pack differs from other Bosch ME9.0C packs
Named here, but by under half of the 10 Bosch ME9.0C packs (14 of 19, the rarest first):
- Catalytic converter Diagnosis (1=ON 10%
- Lambda Sensor (1=ON 10%
- Correction of steady turbo pressure f(IAT) 20%
- Engine torque correction 20%
- Exhaust gas temperature 20%
- Injection at full load 20%
- MAF sensor slope 20%
- Minimum Spark Advance 20%
- Torque request - Low speed 20%
- Torque request during take off condition - Reverse Gear 20%
- Wastegate Duty Cycle 20%
- Reference of maximum throttle valve angle 30%
- Calculated engine torque 40%
- Correction of turbo pressure f(IAT) 40%
Named by at least half of them, but not by this pack:
- Injection base map 80%
- Injection correction f(ECT) 80%
- Limiter of Turbo pressure f(APS) 80%
- Limiter of impulsive turbo pressure 80%
- Linearization of impulsive turbo pressure 80%
97 maps against the Bosch ME9.0C median
The 10 Bosch ME9.0C packs name 36 to 99 maps, median 46.5; 80% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Spark Advance | 21 | 13 |
| Engine Torque | 20 | 3.5 |
| Air Control | 14 | 5 |
| Turbo System | 12 | 7.5 |
| Other | 9 | 0 |
| Variable Valve Timing (VVT) | 9 | 4 |
| Injection System | 6 | 5.5 |
| Limiters | 6 | 5.5 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.