0281020048 1037374255 Bosch EDC7UC31 map pack 77 maps – NEW Holland Truck T7 6.7 270hp
0281020048SW1037374255This pack holds 77 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
NEW Holland Truck T7 6.7 270hp · Bosch EDC7UC31
Also written: 0 281 020 048 · 1 037 374 255
More packs: NEW Holland Truck T7 · Bosch EDC7UC31
All 77 maps
The percentage beside a name: the share of the 43 Bosch EDC7UC31 packs that name it too.
Engine Torque 28 maps
- Limiter of Maximum torque11 maps · 100%
- Torque during cranking f(RPM,ECT)84%
- Limiter of Maximum torque f(APS)77%
- Torque limiter at gearbox input8 maps · 44%
- Maximum torque for fifth gear35%
- Maximum torque for first gear35%
- Maximum torque for forth gear35%
- Maximum torque for second gear35%
- Maximum torque for third gear35%
- Maximum torque for sixth gear14%
- Torque request during take off condition12%
Injection System 21 maps
- Injection timing - Main Injection Base Map 16 maps · 100%
- Fuel quantity injected f(RPM,Trq)81%
- Smoke limitation - Lower Lambda value3 maps · 81%
- Fuel quantity limiter7 maps · 79%
- Injection time72%
- Injection base map3 maps · 70%
Turbo System 14 maps
- Turbo pressure5 maps · 86%
- Correction of turbo pressure f(IAT)63%
- Variable Geometry Duty Cycle6 maps · 51%
- Limiter of Turbo pressure2 maps · 42%
Rail 7 maps
- Rail pressure4 maps · 91%
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 91%
- Rail pressure limiter f(RPM,Fuel_T)74%
Air Control 6 maps
- EGR control - Opening percentage4 maps · 47%
- Gas quantity recirculation44%
- Air quantity - Base map40%
Limiters 1 map
- Idle engine speed f(ECT)58%
How this pack differs from other Bosch EDC7UC31 packs
Named here, but by under half of the 43 Bosch EDC7UC31 packs:
- Torque request during take off condition 12%
- Maximum torque for sixth gear 14%
- Maximum torque for fifth gear 35%
- Maximum torque for first gear 35%
- Maximum torque for forth gear 35%
- Maximum torque for second gear 35%
- Maximum torque for third gear 35%
- Air quantity - Base map 40%
- Limiter of Turbo pressure 42%
- Gas quantity recirculation 44%
- Torque limiter at gearbox input 44%
- EGR control - Opening percentage 47%
Named by at least half of them, but not by this pack:
- Injection timing - Main Injection Base Map 2 86%
- Torque request during standard condition 65%
- Injection timing - Main Injection Base Map 3 60%
- Injection timing - Main Injection Base Map 4 58%
- Injection timing - Main Injection Base Map 5 51%
77 maps against the Bosch EDC7UC31 median
The 43 Bosch EDC7UC31 packs name 18 to 78 maps, median 49; 93% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 28 | 14 |
| Injection System | 21 | 19 |
| Turbo System | 14 | 8 |
| Rail | 7 | 5 |
| Air Control | 6 | 1 |
| Limiters | 1 | 1 |
Other SW versions on HW 0281020048
18 SW versions sit on this HW in the archive, 62 files in all: Iveco Stralis (14), NEW Holland Truck T8 (4), NEW Holland Truck T7 (4). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037380696 | NEW Holland Truck T7 6.7 175hp F4DFE613B_A004 | none listed |
| 1037378050 | NEW Holland Truck CR 12.8 455hp | none listed |
| 1037378082 | Case AFX 9.0 430hp | none listed |
| 1037378083 | DAF Truck LF 5.9 280hp | none listed |
| 1037380620 | Iveco Eurocargo 5.9 250hp | none listed |
| 1037380621 | Iveco Autobus 7.8 290hp | none listed |
| 1037380628 | NEW Holland Truck T8 8.7 389hp F2CFE613C_A000 | none listed |
| 1037380634 | Iveco Marine N67 ENT M56 6.7 560hp | none listed |
| 1037380635 | Iveco Cursor 13.0 570hp | none listed |
| 1037380638 | Iveco Tector 5.9 215hp | none listed |
| 1037380639 | Iveco Stralis 8.0 310hp | none listed |
| 1037380675 | Case AF 8.7 364hp | 37 maps |
| 1037380677 | Case AF 8.7 449hp | none listed |
| 1037380678 | Case IH 13.0 475hp | none listed |
| 1037380685 | NEW Holland Truck T8 8.7 375hp | none listed |
| 1037380712 | Ford Truck Cargo 10.3 420hp FPT | none listed |
| 1039S56197 | Ford Truck Cargo 10.3 450hp | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.